Journal Publications

  1. In vitro and in vivo assessment of biomedical Mg–Ca alloys for bone implant applications
    P Makkar, SK Sarkar, AR Padalhin, BG Moon, YS Lee, BT Lee
    Journal of applied biomaterials & functional materials, 2018 Jul;16(3):126-136.
    Impact Factor: 1.403
  2. A Study of BMP-2-Loaded Bipotential Electrolytic Complex around a Biphasic Calcium Phosphate-Derived (BCP) Scaffold for Repair of Large Segmental Bone Defect.
    Kallyanashis Paul, Andrew R. Padalhin, Nguyen T. B Linh, Boram Kim, Swapan Kumar Sarkar, ByongTaek Lee
    PLoS ONE 11(10): e0163708. 2016
    Impact Factor: 2.776
  3. Brushite-based calcium phosphate cement with multichannel hydroxyapatite granule loading for improved bone regeneration.
    Swapan Kumar Sarkar, ByungYeol Lee, Andrew ReyasPadalhin, AvikSarker, Nathaniel Carpena, Boram Kim, Kallyanshish Paul, Hwan Jun Choi, Sang-Ho Bae, ByongTaek Lee.
    Journal of BiomaterialsApplication 2016, 30(6) p823-837.
    Impact Factor: 2.442
  4. Synthesis of a novel bioactive glass using the ultrasonic energy assisted hydrothermal method and their biocompatibility evaluation.
    Swapan Kumar Sarkar, Alexander Sadiasa, ByongTaek Lee.
    Journal of Materials Research 2014, 29 (16), p1781-1789.
    Impact Factor: 1.982
  5. Hard tissue regeneration using bone substitutes: an update on innovations in materials.
    Swapan Kumar Sarkar and ByongTaek Lee.
    Korean Journal of Internal Medicine, Vol. 30, No.3, pp 1-15, 2015. (Review paper)
    Impact Factor: 2.131
  6. Effect of rat bone marrow derived–stem cell delivery from serum-loaded oxidized alginate–gelatin– biphasic calcium phosphate hydrogel for bone tissue regeneration using a nude mouse critical-sized calvarial defect model.
    Kallyanashis Paul, Nguyen Thuy Ba Linh, Bo-ram Kim, Swapan Kumar Sarkar, Hwan-Jun Choi, Sang-Ho Bae, Young-Ki Min and Byong-Taek Lee.
    Journal of Bioactive and Compatible Polymers, Vol. 30,No 2,pp. 188-208, 2015.
    Impact Factor: 1.976
  7. Evaluation of the potential anti‐adhesion effect of the PVA/Gelatin membrane.
    Sang‐Ho Bae, So‐Ra Son, Swapan Kumar Sakar, Thi‐Hiep Nguyen, Shin‐Woo Kim, Young‐Ki Min, ByongTaek Lee.
    Journal of Biomedical Materials Research Part B: Applied Biomaterials 2014, 102 (4), p 840-849.
    Impact Factor: 2.674
  8. BMP-2 Immoblized in BCP-Chitosan-Hyaluronic Acid Hybrid Scaffold for Bone Tissue Engineering.
    Subrata Deb Nath, Celine Abueva, Swapan Kumar Sarkar and ByongTaek Lee
    Korean Journal of Materials Research, 2014, 24(12) p704-709.
    Impact Factor: No IF
  9. Platelet-rich plasma encapsulation in hyaluronic acid/gelatin-BCP hydrogel for growth factor delivery in BCP sponge scaffold for bone regeneration.
    So-Ra Son, Swapan Kumar Sarkar, Nguyen Thui Ba Linh, Andrew R Padalhin, Bo-Ram Kim, Hae Il Jung and ByongTaek Lee.
    Journal of biomaterials applications, 2014DOI: 10.1177/0885328214551373.
    Impact Factor: 2.442
  10. The effects of dimethyl 3, 3′-dithiobispropionimidate di-hydrochloride cross-linking of collagen and gelatin coating on porous spherical biphasic calcium phosphate granules.
    Yang Hee Kim, So-Ra Son, Swapan Kumar Sarkar, ByongTaek Lee.
    Journal of biomaterials applications, 2014,  DOI:10.1177/0885328214530483.
    Impact Factor: 2.442
  11. Fabrication of Porous Hydroxyapatite Scaffolds as Artificial Bone Preform and its Biocompatibility Evaluation.
    Dong-Woo Jang, Rose Ann Franco, Swapan Kumar Sarkar, Byong-Taek Lee.
    ASAIO Journal 2014, 60 (2), p 216.
    Impact Factor: 2.494
  12. Bioactive glass incorporation in calcium phosphate cement-based injectable bone substitute for improved in vitro biocompatibility and in vivo bone regeneration.
    Alexander Sadiasa, Swapan Kumar Sarkar, Rose Ann Franco, Young Ki Min, ByongTaek Lee.
    Journal of biomaterials applications 2014, 28 (5), p739-756.
    Impact Factor: 2.442
  13. Fabrication of multilayer ZrO2–biphasic calcium phosphate–poly-caprolactone unidirectional channeled scaffold for bone tissue formation.
    Dibkar Mondal, So-Ra Son, Swapan Kumar Sarkar, Young Ki Min, Hun Mo Yang, ByongTaek Lee.
    Journal of biomaterials applications 2013, 28 (3), p462-472.
    Impact Factor: 2.442
  14. Residual Stress on Concentric Laminated Fibrous Al2O3-ZrO2 Composites on Prolonged High Temperature Exposure.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Korean Journal of Materials Research 2013, 23 (9), p531-536.
    Impact Factor: No IF
  15. Evaluation of formation process of spherical porous biphasic calcium phosphate (BCP) granules by slurry dripping method.
    Swapan Kumar Sarkar, Do-Van Tuyen, Byong-Taek Lee.
    Metals and Materials International 2012, 18 (4), p717-721.
    Impact Factor: 1.647
  16. Microwave sintering and in vitro study of defect-free stable porous multilayered HAp–ZrO2 artificial bone scaffold.
    Dong-Woo Jang, Thi-Hiep Nguyen, Swapan Kumar Sarkar, Byong-Taek Lee.
    Science and Technology of Advanced Materials 2012, 13 (3), 035009.
    Impact Factor: 3.585
  17. Fabrication of novel multilayer Al2O3–(m-ZrO2)/t-ZrO2fibrous ceramics composites.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics International 2012, 38 (2), p1043-1050.
    Impact Factor: 3.057
  18. Formation of TiO2nano fibers on a micro-channeled Al2O3–ZrO2/TiO2 porous composite membrane for photocatalytic filtration.
    Hyun-Jin Hong, Swapan Kumar Sarkar, Byong-Taek Lee.
    Journal of the European Ceramic Society 2012 32 (3), p657-663.
    Impact Factor: 3.794
  19. Comparative Study of Microstructures and Material Properties in the Vacuum and Spark Plasma Sintered Ti-Calcium Phosphate Composites.
    Dibakar Mondal, Swapan Kumar Sarkar, Ik-Hyun Oh, Byong-Taek Lee.
    Materials transactions 2011, 52 (7), p1436-1442.
    Impact Factor: 0.675
  20. Fabrication and characterization of the Ti-Ca-P composites by vacuum sintering.
    Dibakar Mondal, Swapan Kumar Sarkar, Dong-Won Lee, Young-Seon Lee, Byong-Taek Lee.
    Journal of Biomedical Science 2011, 4 p583-590.
    Impact Factor: 5.203
  21. Synthesis of Bioactive Glass by Microwave Energy Irradiation and Its In-Vitro Biocompatibility
    Swapan Kumar Sarkar, ByongTaek Lee
    Bioceramics Development and Applications 2011, 1, p1-3
    Impact Factor: No IF
  22. Co-Axially Laminated Continuously Porous Composites in Al2O3-(m-ZrO2)/t-ZrO2 System for High Mechanical Strength.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Materials transactions 2010, 51 (12), p2168-2172.
    Impact Factor: 0.674
  23. Initial biocompatibility and enhanced osteoblast response of Si doping in a porous BCP bone graft substitute.
    In-SeonByun, Swapan Kumar Sarkar, M AnirbanJyoti, Young-Ki Min, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Journal of Materials Science: Materials in Medicine 2010, 21 (6), p1937-1947.
    Impact Factor: 2.467
  24. Effect of Strontium Doped Porous BCP as Bone Graft Substitutes on Osteoblast.
    In-SeonByun, Swapan Kumar Sarkar, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Korean J. Mater. Res 2010, 20 (3), p155-160.
    Impact Factor: No IF
  25. Evaluation and comparison of the microstructure and mechanical properties of fibrous Al2O3―(m-ZrO2)/t-ZrO2 composites after multiple extrusion steps.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics international 2010, 36 (6), p1971-1976
    Impact Factor: 3.057
  26. Fabrication of super-high-strength microchanneled Al2O3–ZrO2 ceramic composites with fibrous microstructure.
    ByongTaek Lee,Swapan Kumar Sarkar.
    ScriptaMaterialia2009, 61 (7), p686-689

    Impact Factor: 4.539
  27. Fabrication of bioglass infiltrated Al2O3–(m-ZrO2) composites.
    Ho-Yeon Song, Swapan Kumar Sarkar, Min Sung Kim, Young Ki Min, Yang Hun Mo, Byong-Taek Lee.
    Journal of Materials Science: Materials in Medicine 2009, 20 (1), p265-269
    Impact Factor: 2.467
  28. Fabrication of fibrous Al2O3-(m-ZrO2)/HAp-(t-ZrO2) core/shell composites with elongated grain formation.
    Byong-Taek Lee, Chi-Woo Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the Ceramic Society of Japan 2009, 117 (1362), p152-156
    Impact Factor: 0.828
  29. Microstructure and material properties of double-network type fibrous (Al2O3–m-ZrO2)/t-ZrO2 composites.
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the European Ceramic Society 2008, 28 (1), p229-233
    Impact Factor: 3.794
  30. Novel bamboo-like fibrous, micro-channeled and functional gradient microstructure control of ceramics
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Materials transactions 2008, 49 (2), p339-344
    Impact Factor: 0.674
  31. Fabrication and Characterization of Porous TCP coated Al2O3 Scaffold by Polymeric Sponge Method.
    Swapan Kumar Sarkar, Young Hee Kim, Min Sung Kim, Young Ki Min, Hun Mo Yang, Ho-Yeon Song, Byong-Taek Lee.
    Journal of the Korean Ceramic Society 2007, 45 (10), p579-583.
    Impact Factor: No Impact factor
  32. Fabrication and microstructure control of continuously porous ceramics with Al2O3-(m-ZrO2) and t-ZrO2 multilayer shell.
    Swapan Kumar Sarkar, RajatKanti Paul, ByongTaek Lee.
    Solid State Phenomena 2007, 124, p1113-1116.
    Impact Factor: 0.400
  33. Fabrication of CNT-reinforced HAp composites by spark plasma sintering.
    Swapan Kumar Sarkar, Min Ho Youn, Ik Hyun Oh, ByongTaek Lee.
    Materials science forum 2007, 534, p893-896
    Impact Factor: No Impact factor
  34. Core/shell volume effect on the microstructure and mechanical properties of fibrous Al2O3-(m-ZrO2)/t-ZrO2 composite.
    ByongTaek Lee, Swapan Kumar Sarkar, Asit Kumar Gain, Soo-Jae Yim, Ho Yeon Song
    Materials science & engineering. A, 2006,  432(1-2) p 317-323
    Impact Factor: 4.081

  1. In vitro and in vivo assessment of biomedical Mg–Ca alloys for bone implant applications
    P Makkar, SK Sarkar, AR Padalhin, BG Moon, YS Lee, BT Lee
    Journal of applied biomaterials & functional materials, 2018 Jul;16(3):126-136.
    Impact Factor: 1.403
  2. A Study of BMP-2-Loaded Bipotential Electrolytic Complex around a Biphasic Calcium Phosphate-Derived (BCP) Scaffold for Repair of Large Segmental Bone Defect.
    Kallyanashis Paul, Andrew R. Padalhin, Nguyen T. B Linh, Boram Kim, Swapan Kumar Sarkar, ByongTaek Lee
    PLoS ONE 11(10): e0163708. 2016
    Impact Factor: 2.776
  3. Brushite-based calcium phosphate cement with multichannel hydroxyapatite granule loading for improved bone regeneration.
    Swapan Kumar Sarkar, ByungYeol Lee, Andrew ReyasPadalhin, AvikSarker, Nathaniel Carpena, Boram Kim, Kallyanshish Paul, Hwan Jun Choi, Sang-Ho Bae, ByongTaek Lee.
    Journal of BiomaterialsApplication 2016, 30(6) p823-837.
    Impact Factor: 2.442
  4. Synthesis of a novel bioactive glass using the ultrasonic energy assisted hydrothermal method and their biocompatibility evaluation.
    Swapan Kumar Sarkar, Alexander Sadiasa, ByongTaek Lee.
    Journal of Materials Research 2014, 29 (16), p1781-1789.
    Impact Factor: 1.982
  5. Hard tissue regeneration using bone substitutes: an update on innovations in materials.
    Swapan Kumar Sarkar and ByongTaek Lee.
    Korean Journal of Internal Medicine, Vol. 30, No.3, pp 1-15, 2015. (Review paper)
    Impact Factor: 2.131
  6. Effect of rat bone marrow derived–stem cell delivery from serum-loaded oxidized alginate–gelatin– biphasic calcium phosphate hydrogel for bone tissue regeneration using a nude mouse critical-sized calvarial defect model.
    Kallyanashis Paul, Nguyen Thuy Ba Linh, Bo-ram Kim, Swapan Kumar Sarkar, Hwan-Jun Choi, Sang-Ho Bae, Young-Ki Min and Byong-Taek Lee.
    Journal of Bioactive and Compatible Polymers, Vol. 30,No 2,pp. 188-208, 2015.
    Impact Factor: 1.976
  7. Evaluation of the potential anti‐adhesion effect of the PVA/Gelatin membrane.
    Sang‐Ho Bae, So‐Ra Son, Swapan Kumar Sakar, Thi‐Hiep Nguyen, Shin‐Woo Kim, Young‐Ki Min, ByongTaek Lee.
    Journal of Biomedical Materials Research Part B: Applied Biomaterials 2014, 102 (4), p 840-849.
    Impact Factor: 2.674
  8. BMP-2 Immoblized in BCP-Chitosan-Hyaluronic Acid Hybrid Scaffold for Bone Tissue Engineering.
    Subrata Deb Nath, Celine Abueva, Swapan Kumar Sarkar and ByongTaek Lee
    Korean Journal of Materials Research, 2014, 24(12) p704-709.
    Impact Factor: No IF
  9. Platelet-rich plasma encapsulation in hyaluronic acid/gelatin-BCP hydrogel for growth factor delivery in BCP sponge scaffold for bone regeneration.
    So-Ra Son, Swapan Kumar Sarkar, Nguyen Thui Ba Linh, Andrew R Padalhin, Bo-Ram Kim, Hae Il Jung and ByongTaek Lee.
    Journal of biomaterials applications, 2014DOI: 10.1177/0885328214551373.
    Impact Factor: 2.442
  10. The effects of dimethyl 3, 3′-dithiobispropionimidate di-hydrochloride cross-linking of collagen and gelatin coating on porous spherical biphasic calcium phosphate granules.
    Yang Hee Kim, So-Ra Son, Swapan Kumar Sarkar, ByongTaek Lee.
    Journal of biomaterials applications, 2014,  DOI:10.1177/0885328214530483.
    Impact Factor: 2.442
  11. Fabrication of Porous Hydroxyapatite Scaffolds as Artificial Bone Preform and its Biocompatibility Evaluation.
    Dong-Woo Jang, Rose Ann Franco, Swapan Kumar Sarkar, Byong-Taek Lee.
    ASAIO Journal 2014, 60 (2), p 216.
    Impact Factor: 2.494
  12. Bioactive glass incorporation in calcium phosphate cement-based injectable bone substitute for improved in vitro biocompatibility and in vivo bone regeneration.
    Alexander Sadiasa, Swapan Kumar Sarkar, Rose Ann Franco, Young Ki Min, ByongTaek Lee.
    Journal of biomaterials applications 2014, 28 (5), p739-756.
    Impact Factor: 2.442
  13. Fabrication of multilayer ZrO2–biphasic calcium phosphate–poly-caprolactone unidirectional channeled scaffold for bone tissue formation.
    Dibkar Mondal, So-Ra Son, Swapan Kumar Sarkar, Young Ki Min, Hun Mo Yang, ByongTaek Lee.
    Journal of biomaterials applications 2013, 28 (3), p462-472.
    Impact Factor: 2.442
  14. Residual Stress on Concentric Laminated Fibrous Al2O3-ZrO2 Composites on Prolonged High Temperature Exposure.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Korean Journal of Materials Research 2013, 23 (9), p531-536.
    Impact Factor: No IF
  15. Evaluation of formation process of spherical porous biphasic calcium phosphate (BCP) granules by slurry dripping method.
    Swapan Kumar Sarkar, Do-Van Tuyen, Byong-Taek Lee.
    Metals and Materials International 2012, 18 (4), p717-721.
    Impact Factor: 1.647
  16. Microwave sintering and in vitro study of defect-free stable porous multilayered HAp–ZrO2 artificial bone scaffold.
    Dong-Woo Jang, Thi-Hiep Nguyen, Swapan Kumar Sarkar, Byong-Taek Lee.
    Science and Technology of Advanced Materials 2012, 13 (3), 035009.
    Impact Factor: 3.585
  17. Fabrication of novel multilayer Al2O3–(m-ZrO2)/t-ZrO2fibrous ceramics composites.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics International 2012, 38 (2), p1043-1050.
    Impact Factor: 3.057
  18. Formation of TiO2nano fibers on a micro-channeled Al2O3–ZrO2/TiO2 porous composite membrane for photocatalytic filtration.
    Hyun-Jin Hong, Swapan Kumar Sarkar, Byong-Taek Lee.
    Journal of the European Ceramic Society 2012 32 (3), p657-663.
    Impact Factor: 3.794
  19. Comparative Study of Microstructures and Material Properties in the Vacuum and Spark Plasma Sintered Ti-Calcium Phosphate Composites.
    Dibakar Mondal, Swapan Kumar Sarkar, Ik-Hyun Oh, Byong-Taek Lee.
    Materials transactions 2011, 52 (7), p1436-1442.
    Impact Factor: 0.675
  20. Fabrication and characterization of the Ti-Ca-P composites by vacuum sintering.
    Dibakar Mondal, Swapan Kumar Sarkar, Dong-Won Lee, Young-Seon Lee, Byong-Taek Lee.
    Journal of Biomedical Science 2011, 4 p583-590.
    Impact Factor: 5.203
  21. Synthesis of Bioactive Glass by Microwave Energy Irradiation and Its In-Vitro Biocompatibility
    Swapan Kumar Sarkar, ByongTaek Lee
    Bioceramics Development and Applications 2011, 1, p1-3
    Impact Factor: No IF
  22. Co-Axially Laminated Continuously Porous Composites in Al2O3-(m-ZrO2)/t-ZrO2 System for High Mechanical Strength.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Materials transactions 2010, 51 (12), p2168-2172.
    Impact Factor: 0.674
  23. Initial biocompatibility and enhanced osteoblast response of Si doping in a porous BCP bone graft substitute.
    In-SeonByun, Swapan Kumar Sarkar, M AnirbanJyoti, Young-Ki Min, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Journal of Materials Science: Materials in Medicine 2010, 21 (6), p1937-1947.
    Impact Factor: 2.467
  24. Effect of Strontium Doped Porous BCP as Bone Graft Substitutes on Osteoblast.
    In-SeonByun, Swapan Kumar Sarkar, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Korean J. Mater. Res 2010, 20 (3), p155-160.
    Impact Factor: No IF
  25. Evaluation and comparison of the microstructure and mechanical properties of fibrous Al2O3―(m-ZrO2)/t-ZrO2 composites after multiple extrusion steps.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics international 2010, 36 (6), p1971-1976
    Impact Factor: 3.057
  26. Fabrication of super-high-strength microchanneled Al2O3–ZrO2 ceramic composites with fibrous microstructure.
    ByongTaek Lee,Swapan Kumar Sarkar.
    ScriptaMaterialia2009, 61 (7), p686-689

    Impact Factor: 4.539
  27. Fabrication of bioglass infiltrated Al2O3–(m-ZrO2) composites.
    Ho-Yeon Song, Swapan Kumar Sarkar, Min Sung Kim, Young Ki Min, Yang Hun Mo, Byong-Taek Lee.
    Journal of Materials Science: Materials in Medicine 2009, 20 (1), p265-269
    Impact Factor: 2.467
  28. Fabrication of fibrous Al2O3-(m-ZrO2)/HAp-(t-ZrO2) core/shell composites with elongated grain formation.
    Byong-Taek Lee, Chi-Woo Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the Ceramic Society of Japan 2009, 117 (1362), p152-156
    Impact Factor: 0.828
  29. Microstructure and material properties of double-network type fibrous (Al2O3–m-ZrO2)/t-ZrO2 composites.
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the European Ceramic Society 2008, 28 (1), p229-233
    Impact Factor: 3.794
  30. Novel bamboo-like fibrous, micro-channeled and functional gradient microstructure control of ceramics
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Materials transactions 2008, 49 (2), p339-344
    Impact Factor: 0.674
  31. Fabrication and Characterization of Porous TCP coated Al2O3 Scaffold by Polymeric Sponge Method.
    Swapan Kumar Sarkar, Young Hee Kim, Min Sung Kim, Young Ki Min, Hun Mo Yang, Ho-Yeon Song, Byong-Taek Lee.
    Journal of the Korean Ceramic Society 2007, 45 (10), p579-583.
    Impact Factor: No Impact factor
  32. Fabrication and microstructure control of continuously porous ceramics with Al2O3-(m-ZrO2) and t-ZrO2 multilayer shell.
    Swapan Kumar Sarkar, RajatKanti Paul, ByongTaek Lee.
    Solid State Phenomena 2007, 124, p1113-1116.
    Impact Factor: 0.400
  33. Fabrication of CNT-reinforced HAp composites by spark plasma sintering.
    Swapan Kumar Sarkar, Min Ho Youn, Ik Hyun Oh, ByongTaek Lee.
    Materials science forum 2007, 534, p893-896
    Impact Factor: No Impact factor
  34. Core/shell volume effect on the microstructure and mechanical properties of fibrous Al2O3-(m-ZrO2)/t-ZrO2 composite.
    ByongTaek Lee, Swapan Kumar Sarkar, Asit Kumar Gain, Soo-Jae Yim, Ho Yeon Song
    Materials science & engineering. A, 2006,  432(1-2) p 317-323
    Impact Factor: 4.081

  1. In vitro and in vivo assessment of biomedical Mg–Ca alloys for bone implant applications
    P Makkar, SK Sarkar, AR Padalhin, BG Moon, YS Lee, BT Lee
    Journal of applied biomaterials & functional materials, 2018 Jul;16(3):126-136.
    Impact Factor: 1.403
  2. A Study of BMP-2-Loaded Bipotential Electrolytic Complex around a Biphasic Calcium Phosphate-Derived (BCP) Scaffold for Repair of Large Segmental Bone Defect.
    Kallyanashis Paul, Andrew R. Padalhin, Nguyen T. B Linh, Boram Kim, Swapan Kumar Sarkar, ByongTaek Lee
    PLoS ONE 11(10): e0163708. 2016
    Impact Factor: 2.776
  3. Brushite-based calcium phosphate cement with multichannel hydroxyapatite granule loading for improved bone regeneration.
    Swapan Kumar Sarkar, ByungYeol Lee, Andrew ReyasPadalhin, AvikSarker, Nathaniel Carpena, Boram Kim, Kallyanshish Paul, Hwan Jun Choi, Sang-Ho Bae, ByongTaek Lee.
    Journal of BiomaterialsApplication 2016, 30(6) p823-837.
    Impact Factor: 2.442
  4. Synthesis of a novel bioactive glass using the ultrasonic energy assisted hydrothermal method and their biocompatibility evaluation.
    Swapan Kumar Sarkar, Alexander Sadiasa, ByongTaek Lee.
    Journal of Materials Research 2014, 29 (16), p1781-1789.
    Impact Factor: 1.982
  5. Hard tissue regeneration using bone substitutes: an update on innovations in materials.
    Swapan Kumar Sarkar and ByongTaek Lee.
    Korean Journal of Internal Medicine, Vol. 30, No.3, pp 1-15, 2015. (Review paper)
    Impact Factor: 2.131
  6. Effect of rat bone marrow derived–stem cell delivery from serum-loaded oxidized alginate–gelatin– biphasic calcium phosphate hydrogel for bone tissue regeneration using a nude mouse critical-sized calvarial defect model.
    Kallyanashis Paul, Nguyen Thuy Ba Linh, Bo-ram Kim, Swapan Kumar Sarkar, Hwan-Jun Choi, Sang-Ho Bae, Young-Ki Min and Byong-Taek Lee.
    Journal of Bioactive and Compatible Polymers, Vol. 30,No 2,pp. 188-208, 2015.
    Impact Factor: 1.976
  7. Evaluation of the potential anti‐adhesion effect of the PVA/Gelatin membrane.
    Sang‐Ho Bae, So‐Ra Son, Swapan Kumar Sakar, Thi‐Hiep Nguyen, Shin‐Woo Kim, Young‐Ki Min, ByongTaek Lee.
    Journal of Biomedical Materials Research Part B: Applied Biomaterials 2014, 102 (4), p 840-849.
    Impact Factor: 2.674
  8. BMP-2 Immoblized in BCP-Chitosan-Hyaluronic Acid Hybrid Scaffold for Bone Tissue Engineering.
    Subrata Deb Nath, Celine Abueva, Swapan Kumar Sarkar and ByongTaek Lee
    Korean Journal of Materials Research, 2014, 24(12) p704-709.
    Impact Factor: No IF
  9. Platelet-rich plasma encapsulation in hyaluronic acid/gelatin-BCP hydrogel for growth factor delivery in BCP sponge scaffold for bone regeneration.
    So-Ra Son, Swapan Kumar Sarkar, Nguyen Thui Ba Linh, Andrew R Padalhin, Bo-Ram Kim, Hae Il Jung and ByongTaek Lee.
    Journal of biomaterials applications, 2014DOI: 10.1177/0885328214551373.
    Impact Factor: 2.442
  10. The effects of dimethyl 3, 3′-dithiobispropionimidate di-hydrochloride cross-linking of collagen and gelatin coating on porous spherical biphasic calcium phosphate granules.
    Yang Hee Kim, So-Ra Son, Swapan Kumar Sarkar, ByongTaek Lee.
    Journal of biomaterials applications, 2014,  DOI:10.1177/0885328214530483.
    Impact Factor: 2.442
  11. Fabrication of Porous Hydroxyapatite Scaffolds as Artificial Bone Preform and its Biocompatibility Evaluation.
    Dong-Woo Jang, Rose Ann Franco, Swapan Kumar Sarkar, Byong-Taek Lee.
    ASAIO Journal 2014, 60 (2), p 216.
    Impact Factor: 2.494
  12. Bioactive glass incorporation in calcium phosphate cement-based injectable bone substitute for improved in vitro biocompatibility and in vivo bone regeneration.
    Alexander Sadiasa, Swapan Kumar Sarkar, Rose Ann Franco, Young Ki Min, ByongTaek Lee.
    Journal of biomaterials applications 2014, 28 (5), p739-756.
    Impact Factor: 2.442
  13. Fabrication of multilayer ZrO2–biphasic calcium phosphate–poly-caprolactone unidirectional channeled scaffold for bone tissue formation.
    Dibkar Mondal, So-Ra Son, Swapan Kumar Sarkar, Young Ki Min, Hun Mo Yang, ByongTaek Lee.
    Journal of biomaterials applications 2013, 28 (3), p462-472.
    Impact Factor: 2.442
  14. Residual Stress on Concentric Laminated Fibrous Al2O3-ZrO2 Composites on Prolonged High Temperature Exposure.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Korean Journal of Materials Research 2013, 23 (9), p531-536.
    Impact Factor: No IF
  15. Evaluation of formation process of spherical porous biphasic calcium phosphate (BCP) granules by slurry dripping method.
    Swapan Kumar Sarkar, Do-Van Tuyen, Byong-Taek Lee.
    Metals and Materials International 2012, 18 (4), p717-721.
    Impact Factor: 1.647
  16. Microwave sintering and in vitro study of defect-free stable porous multilayered HAp–ZrO2 artificial bone scaffold.
    Dong-Woo Jang, Thi-Hiep Nguyen, Swapan Kumar Sarkar, Byong-Taek Lee.
    Science and Technology of Advanced Materials 2012, 13 (3), 035009.
    Impact Factor: 3.585
  17. Fabrication of novel multilayer Al2O3–(m-ZrO2)/t-ZrO2fibrous ceramics composites.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics International 2012, 38 (2), p1043-1050.
    Impact Factor: 3.057
  18. Formation of TiO2nano fibers on a micro-channeled Al2O3–ZrO2/TiO2 porous composite membrane for photocatalytic filtration.
    Hyun-Jin Hong, Swapan Kumar Sarkar, Byong-Taek Lee.
    Journal of the European Ceramic Society 2012 32 (3), p657-663.
    Impact Factor: 3.794
  19. Comparative Study of Microstructures and Material Properties in the Vacuum and Spark Plasma Sintered Ti-Calcium Phosphate Composites.
    Dibakar Mondal, Swapan Kumar Sarkar, Ik-Hyun Oh, Byong-Taek Lee.
    Materials transactions 2011, 52 (7), p1436-1442.
    Impact Factor: 0.675
  20. Fabrication and characterization of the Ti-Ca-P composites by vacuum sintering.
    Dibakar Mondal, Swapan Kumar Sarkar, Dong-Won Lee, Young-Seon Lee, Byong-Taek Lee.
    Journal of Biomedical Science 2011, 4 p583-590.
    Impact Factor: 5.203
  21. Synthesis of Bioactive Glass by Microwave Energy Irradiation and Its In-Vitro Biocompatibility
    Swapan Kumar Sarkar, ByongTaek Lee
    Bioceramics Development and Applications 2011, 1, p1-3
    Impact Factor: No IF
  22. Co-Axially Laminated Continuously Porous Composites in Al2O3-(m-ZrO2)/t-ZrO2 System for High Mechanical Strength.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Materials transactions 2010, 51 (12), p2168-2172.
    Impact Factor: 0.674
  23. Initial biocompatibility and enhanced osteoblast response of Si doping in a porous BCP bone graft substitute.
    In-SeonByun, Swapan Kumar Sarkar, M AnirbanJyoti, Young-Ki Min, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Journal of Materials Science: Materials in Medicine 2010, 21 (6), p1937-1947.
    Impact Factor: 2.467
  24. Effect of Strontium Doped Porous BCP as Bone Graft Substitutes on Osteoblast.
    In-SeonByun, Swapan Kumar Sarkar, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Korean J. Mater. Res 2010, 20 (3), p155-160.
    Impact Factor: No IF
  25. Evaluation and comparison of the microstructure and mechanical properties of fibrous Al2O3―(m-ZrO2)/t-ZrO2 composites after multiple extrusion steps.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics international 2010, 36 (6), p1971-1976
    Impact Factor: 3.057
  26. Fabrication of super-high-strength microchanneled Al2O3–ZrO2 ceramic composites with fibrous microstructure.
    ByongTaek Lee,Swapan Kumar Sarkar.
    ScriptaMaterialia2009, 61 (7), p686-689

    Impact Factor: 4.539
  27. Fabrication of bioglass infiltrated Al2O3–(m-ZrO2) composites.
    Ho-Yeon Song, Swapan Kumar Sarkar, Min Sung Kim, Young Ki Min, Yang Hun Mo, Byong-Taek Lee.
    Journal of Materials Science: Materials in Medicine 2009, 20 (1), p265-269
    Impact Factor: 2.467
  28. Fabrication of fibrous Al2O3-(m-ZrO2)/HAp-(t-ZrO2) core/shell composites with elongated grain formation.
    Byong-Taek Lee, Chi-Woo Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the Ceramic Society of Japan 2009, 117 (1362), p152-156
    Impact Factor: 0.828
  29. Microstructure and material properties of double-network type fibrous (Al2O3–m-ZrO2)/t-ZrO2 composites.
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the European Ceramic Society 2008, 28 (1), p229-233
    Impact Factor: 3.794
  30. Novel bamboo-like fibrous, micro-channeled and functional gradient microstructure control of ceramics
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Materials transactions 2008, 49 (2), p339-344
    Impact Factor: 0.674
  31. Fabrication and Characterization of Porous TCP coated Al2O3 Scaffold by Polymeric Sponge Method.
    Swapan Kumar Sarkar, Young Hee Kim, Min Sung Kim, Young Ki Min, Hun Mo Yang, Ho-Yeon Song, Byong-Taek Lee.
    Journal of the Korean Ceramic Society 2007, 45 (10), p579-583.
    Impact Factor: No Impact factor
  32. Fabrication and microstructure control of continuously porous ceramics with Al2O3-(m-ZrO2) and t-ZrO2 multilayer shell.
    Swapan Kumar Sarkar, RajatKanti Paul, ByongTaek Lee.
    Solid State Phenomena 2007, 124, p1113-1116.
    Impact Factor: 0.400
  33. Fabrication of CNT-reinforced HAp composites by spark plasma sintering.
    Swapan Kumar Sarkar, Min Ho Youn, Ik Hyun Oh, ByongTaek Lee.
    Materials science forum 2007, 534, p893-896
    Impact Factor: No Impact factor
  34. Core/shell volume effect on the microstructure and mechanical properties of fibrous Al2O3-(m-ZrO2)/t-ZrO2 composite.
    ByongTaek Lee, Swapan Kumar Sarkar, Asit Kumar Gain, Soo-Jae Yim, Ho Yeon Song
    Materials science & engineering. A, 2006,  432(1-2) p 317-323
    Impact Factor: 4.081

  1. In vitro and in vivo assessment of biomedical Mg–Ca alloys for bone implant applications
    P Makkar, SK Sarkar, AR Padalhin, BG Moon, YS Lee, BT Lee
    Journal of applied biomaterials & functional materials, 2018 Jul;16(3):126-136.
    Impact Factor: 1.403
  2. A Study of BMP-2-Loaded Bipotential Electrolytic Complex around a Biphasic Calcium Phosphate-Derived (BCP) Scaffold for Repair of Large Segmental Bone Defect.
    Kallyanashis Paul, Andrew R. Padalhin, Nguyen T. B Linh, Boram Kim, Swapan Kumar Sarkar, ByongTaek Lee
    PLoS ONE 11(10): e0163708. 2016
    Impact Factor: 2.776
  3. Brushite-based calcium phosphate cement with multichannel hydroxyapatite granule loading for improved bone regeneration.
    Swapan Kumar Sarkar, ByungYeol Lee, Andrew ReyasPadalhin, AvikSarker, Nathaniel Carpena, Boram Kim, Kallyanshish Paul, Hwan Jun Choi, Sang-Ho Bae, ByongTaek Lee.
    Journal of BiomaterialsApplication 2016, 30(6) p823-837.
    Impact Factor: 2.442
  4. Synthesis of a novel bioactive glass using the ultrasonic energy assisted hydrothermal method and their biocompatibility evaluation.
    Swapan Kumar Sarkar, Alexander Sadiasa, ByongTaek Lee.
    Journal of Materials Research 2014, 29 (16), p1781-1789.
    Impact Factor: 1.982
  5. Hard tissue regeneration using bone substitutes: an update on innovations in materials.
    Swapan Kumar Sarkar and ByongTaek Lee.
    Korean Journal of Internal Medicine, Vol. 30, No.3, pp 1-15, 2015. (Review paper)
    Impact Factor: 2.131
  6. Effect of rat bone marrow derived–stem cell delivery from serum-loaded oxidized alginate–gelatin– biphasic calcium phosphate hydrogel for bone tissue regeneration using a nude mouse critical-sized calvarial defect model.
    Kallyanashis Paul, Nguyen Thuy Ba Linh, Bo-ram Kim, Swapan Kumar Sarkar, Hwan-Jun Choi, Sang-Ho Bae, Young-Ki Min and Byong-Taek Lee.
    Journal of Bioactive and Compatible Polymers, Vol. 30,No 2,pp. 188-208, 2015.
    Impact Factor: 1.976
  7. Evaluation of the potential anti‐adhesion effect of the PVA/Gelatin membrane.
    Sang‐Ho Bae, So‐Ra Son, Swapan Kumar Sakar, Thi‐Hiep Nguyen, Shin‐Woo Kim, Young‐Ki Min, ByongTaek Lee.
    Journal of Biomedical Materials Research Part B: Applied Biomaterials 2014, 102 (4), p 840-849.
    Impact Factor: 2.674
  8. BMP-2 Immoblized in BCP-Chitosan-Hyaluronic Acid Hybrid Scaffold for Bone Tissue Engineering.
    Subrata Deb Nath, Celine Abueva, Swapan Kumar Sarkar and ByongTaek Lee
    Korean Journal of Materials Research, 2014, 24(12) p704-709.
    Impact Factor: No IF
  9. Platelet-rich plasma encapsulation in hyaluronic acid/gelatin-BCP hydrogel for growth factor delivery in BCP sponge scaffold for bone regeneration.
    So-Ra Son, Swapan Kumar Sarkar, Nguyen Thui Ba Linh, Andrew R Padalhin, Bo-Ram Kim, Hae Il Jung and ByongTaek Lee.
    Journal of biomaterials applications, 2014DOI: 10.1177/0885328214551373.
    Impact Factor: 2.442
  10. The effects of dimethyl 3, 3′-dithiobispropionimidate di-hydrochloride cross-linking of collagen and gelatin coating on porous spherical biphasic calcium phosphate granules.
    Yang Hee Kim, So-Ra Son, Swapan Kumar Sarkar, ByongTaek Lee.
    Journal of biomaterials applications, 2014,  DOI:10.1177/0885328214530483.
    Impact Factor: 2.442
  11. Fabrication of Porous Hydroxyapatite Scaffolds as Artificial Bone Preform and its Biocompatibility Evaluation.
    Dong-Woo Jang, Rose Ann Franco, Swapan Kumar Sarkar, Byong-Taek Lee.
    ASAIO Journal 2014, 60 (2), p 216.
    Impact Factor: 2.494
  12. Bioactive glass incorporation in calcium phosphate cement-based injectable bone substitute for improved in vitro biocompatibility and in vivo bone regeneration.
    Alexander Sadiasa, Swapan Kumar Sarkar, Rose Ann Franco, Young Ki Min, ByongTaek Lee.
    Journal of biomaterials applications 2014, 28 (5), p739-756.
    Impact Factor: 2.442
  13. Fabrication of multilayer ZrO2–biphasic calcium phosphate–poly-caprolactone unidirectional channeled scaffold for bone tissue formation.
    Dibkar Mondal, So-Ra Son, Swapan Kumar Sarkar, Young Ki Min, Hun Mo Yang, ByongTaek Lee.
    Journal of biomaterials applications 2013, 28 (3), p462-472.
    Impact Factor: 2.442
  14. Residual Stress on Concentric Laminated Fibrous Al2O3-ZrO2 Composites on Prolonged High Temperature Exposure.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Korean Journal of Materials Research 2013, 23 (9), p531-536.
    Impact Factor: No IF
  15. Evaluation of formation process of spherical porous biphasic calcium phosphate (BCP) granules by slurry dripping method.
    Swapan Kumar Sarkar, Do-Van Tuyen, Byong-Taek Lee.
    Metals and Materials International 2012, 18 (4), p717-721.
    Impact Factor: 1.647
  16. Microwave sintering and in vitro study of defect-free stable porous multilayered HAp–ZrO2 artificial bone scaffold.
    Dong-Woo Jang, Thi-Hiep Nguyen, Swapan Kumar Sarkar, Byong-Taek Lee.
    Science and Technology of Advanced Materials 2012, 13 (3), 035009.
    Impact Factor: 3.585
  17. Fabrication of novel multilayer Al2O3–(m-ZrO2)/t-ZrO2fibrous ceramics composites.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics International 2012, 38 (2), p1043-1050.
    Impact Factor: 3.057
  18. Formation of TiO2nano fibers on a micro-channeled Al2O3–ZrO2/TiO2 porous composite membrane for photocatalytic filtration.
    Hyun-Jin Hong, Swapan Kumar Sarkar, Byong-Taek Lee.
    Journal of the European Ceramic Society 2012 32 (3), p657-663.
    Impact Factor: 3.794
  19. Comparative Study of Microstructures and Material Properties in the Vacuum and Spark Plasma Sintered Ti-Calcium Phosphate Composites.
    Dibakar Mondal, Swapan Kumar Sarkar, Ik-Hyun Oh, Byong-Taek Lee.
    Materials transactions 2011, 52 (7), p1436-1442.
    Impact Factor: 0.675
  20. Fabrication and characterization of the Ti-Ca-P composites by vacuum sintering.
    Dibakar Mondal, Swapan Kumar Sarkar, Dong-Won Lee, Young-Seon Lee, Byong-Taek Lee.
    Journal of Biomedical Science 2011, 4 p583-590.
    Impact Factor: 5.203
  21. Synthesis of Bioactive Glass by Microwave Energy Irradiation and Its In-Vitro Biocompatibility
    Swapan Kumar Sarkar, ByongTaek Lee
    Bioceramics Development and Applications 2011, 1, p1-3
    Impact Factor: No IF
  22. Co-Axially Laminated Continuously Porous Composites in Al2O3-(m-ZrO2)/t-ZrO2 System for High Mechanical Strength.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Materials transactions 2010, 51 (12), p2168-2172.
    Impact Factor: 0.674
  23. Initial biocompatibility and enhanced osteoblast response of Si doping in a porous BCP bone graft substitute.
    In-SeonByun, Swapan Kumar Sarkar, M AnirbanJyoti, Young-Ki Min, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Journal of Materials Science: Materials in Medicine 2010, 21 (6), p1937-1947.
    Impact Factor: 2.467
  24. Effect of Strontium Doped Porous BCP as Bone Graft Substitutes on Osteoblast.
    In-SeonByun, Swapan Kumar Sarkar, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Korean J. Mater. Res 2010, 20 (3), p155-160.
    Impact Factor: No IF
  25. Evaluation and comparison of the microstructure and mechanical properties of fibrous Al2O3―(m-ZrO2)/t-ZrO2 composites after multiple extrusion steps.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics international 2010, 36 (6), p1971-1976
    Impact Factor: 3.057
  26. Fabrication of super-high-strength microchanneled Al2O3–ZrO2 ceramic composites with fibrous microstructure.
    ByongTaek Lee,Swapan Kumar Sarkar.
    ScriptaMaterialia2009, 61 (7), p686-689

    Impact Factor: 4.539
  27. Fabrication of bioglass infiltrated Al2O3–(m-ZrO2) composites.
    Ho-Yeon Song, Swapan Kumar Sarkar, Min Sung Kim, Young Ki Min, Yang Hun Mo, Byong-Taek Lee.
    Journal of Materials Science: Materials in Medicine 2009, 20 (1), p265-269
    Impact Factor: 2.467
  28. Fabrication of fibrous Al2O3-(m-ZrO2)/HAp-(t-ZrO2) core/shell composites with elongated grain formation.
    Byong-Taek Lee, Chi-Woo Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the Ceramic Society of Japan 2009, 117 (1362), p152-156
    Impact Factor: 0.828
  29. Microstructure and material properties of double-network type fibrous (Al2O3–m-ZrO2)/t-ZrO2 composites.
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the European Ceramic Society 2008, 28 (1), p229-233
    Impact Factor: 3.794
  30. Novel bamboo-like fibrous, micro-channeled and functional gradient microstructure control of ceramics
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Materials transactions 2008, 49 (2), p339-344
    Impact Factor: 0.674
  31. Fabrication and Characterization of Porous TCP coated Al2O3 Scaffold by Polymeric Sponge Method.
    Swapan Kumar Sarkar, Young Hee Kim, Min Sung Kim, Young Ki Min, Hun Mo Yang, Ho-Yeon Song, Byong-Taek Lee.
    Journal of the Korean Ceramic Society 2007, 45 (10), p579-583.
    Impact Factor: No Impact factor
  32. Fabrication and microstructure control of continuously porous ceramics with Al2O3-(m-ZrO2) and t-ZrO2 multilayer shell.
    Swapan Kumar Sarkar, RajatKanti Paul, ByongTaek Lee.
    Solid State Phenomena 2007, 124, p1113-1116.
    Impact Factor: 0.400
  33. Fabrication of CNT-reinforced HAp composites by spark plasma sintering.
    Swapan Kumar Sarkar, Min Ho Youn, Ik Hyun Oh, ByongTaek Lee.
    Materials science forum 2007, 534, p893-896
    Impact Factor: No Impact factor
  34. Core/shell volume effect on the microstructure and mechanical properties of fibrous Al2O3-(m-ZrO2)/t-ZrO2 composite.
    ByongTaek Lee, Swapan Kumar Sarkar, Asit Kumar Gain, Soo-Jae Yim, Ho Yeon Song
    Materials science & engineering. A, 2006,  432(1-2) p 317-323
    Impact Factor: 4.081

  1. In vitro and in vivo assessment of biomedical Mg–Ca alloys for bone implant applications
    P Makkar, SK Sarkar, AR Padalhin, BG Moon, YS Lee, BT Lee
    Journal of applied biomaterials & functional materials, 2018 Jul;16(3):126-136.
    Impact Factor: 1.403
  2. A Study of BMP-2-Loaded Bipotential Electrolytic Complex around a Biphasic Calcium Phosphate-Derived (BCP) Scaffold for Repair of Large Segmental Bone Defect.
    Kallyanashis Paul, Andrew R. Padalhin, Nguyen T. B Linh, Boram Kim, Swapan Kumar Sarkar, ByongTaek Lee
    PLoS ONE 11(10): e0163708. 2016
    Impact Factor: 2.776
  3. Brushite-based calcium phosphate cement with multichannel hydroxyapatite granule loading for improved bone regeneration.
    Swapan Kumar Sarkar, ByungYeol Lee, Andrew ReyasPadalhin, AvikSarker, Nathaniel Carpena, Boram Kim, Kallyanshish Paul, Hwan Jun Choi, Sang-Ho Bae, ByongTaek Lee.
    Journal of BiomaterialsApplication 2016, 30(6) p823-837.
    Impact Factor: 2.442
  4. Synthesis of a novel bioactive glass using the ultrasonic energy assisted hydrothermal method and their biocompatibility evaluation.
    Swapan Kumar Sarkar, Alexander Sadiasa, ByongTaek Lee.
    Journal of Materials Research 2014, 29 (16), p1781-1789.
    Impact Factor: 1.982
  5. Hard tissue regeneration using bone substitutes: an update on innovations in materials.
    Swapan Kumar Sarkar and ByongTaek Lee.
    Korean Journal of Internal Medicine, Vol. 30, No.3, pp 1-15, 2015. (Review paper)
    Impact Factor: 2.131
  6. Effect of rat bone marrow derived–stem cell delivery from serum-loaded oxidized alginate–gelatin– biphasic calcium phosphate hydrogel for bone tissue regeneration using a nude mouse critical-sized calvarial defect model.
    Kallyanashis Paul, Nguyen Thuy Ba Linh, Bo-ram Kim, Swapan Kumar Sarkar, Hwan-Jun Choi, Sang-Ho Bae, Young-Ki Min and Byong-Taek Lee.
    Journal of Bioactive and Compatible Polymers, Vol. 30,No 2,pp. 188-208, 2015.
    Impact Factor: 1.976
  7. Evaluation of the potential anti‐adhesion effect of the PVA/Gelatin membrane.
    Sang‐Ho Bae, So‐Ra Son, Swapan Kumar Sakar, Thi‐Hiep Nguyen, Shin‐Woo Kim, Young‐Ki Min, ByongTaek Lee.
    Journal of Biomedical Materials Research Part B: Applied Biomaterials 2014, 102 (4), p 840-849.
    Impact Factor: 2.674
  8. BMP-2 Immoblized in BCP-Chitosan-Hyaluronic Acid Hybrid Scaffold for Bone Tissue Engineering.
    Subrata Deb Nath, Celine Abueva, Swapan Kumar Sarkar and ByongTaek Lee
    Korean Journal of Materials Research, 2014, 24(12) p704-709.
    Impact Factor: No IF
  9. Platelet-rich plasma encapsulation in hyaluronic acid/gelatin-BCP hydrogel for growth factor delivery in BCP sponge scaffold for bone regeneration.
    So-Ra Son, Swapan Kumar Sarkar, Nguyen Thui Ba Linh, Andrew R Padalhin, Bo-Ram Kim, Hae Il Jung and ByongTaek Lee.
    Journal of biomaterials applications, 2014DOI: 10.1177/0885328214551373.
    Impact Factor: 2.442
  10. The effects of dimethyl 3, 3′-dithiobispropionimidate di-hydrochloride cross-linking of collagen and gelatin coating on porous spherical biphasic calcium phosphate granules.
    Yang Hee Kim, So-Ra Son, Swapan Kumar Sarkar, ByongTaek Lee.
    Journal of biomaterials applications, 2014,  DOI:10.1177/0885328214530483.
    Impact Factor: 2.442
  11. Fabrication of Porous Hydroxyapatite Scaffolds as Artificial Bone Preform and its Biocompatibility Evaluation.
    Dong-Woo Jang, Rose Ann Franco, Swapan Kumar Sarkar, Byong-Taek Lee.
    ASAIO Journal 2014, 60 (2), p 216.
    Impact Factor: 2.494
  12. Bioactive glass incorporation in calcium phosphate cement-based injectable bone substitute for improved in vitro biocompatibility and in vivo bone regeneration.
    Alexander Sadiasa, Swapan Kumar Sarkar, Rose Ann Franco, Young Ki Min, ByongTaek Lee.
    Journal of biomaterials applications 2014, 28 (5), p739-756.
    Impact Factor: 2.442
  13. Fabrication of multilayer ZrO2–biphasic calcium phosphate–poly-caprolactone unidirectional channeled scaffold for bone tissue formation.
    Dibkar Mondal, So-Ra Son, Swapan Kumar Sarkar, Young Ki Min, Hun Mo Yang, ByongTaek Lee.
    Journal of biomaterials applications 2013, 28 (3), p462-472.
    Impact Factor: 2.442
  14. Residual Stress on Concentric Laminated Fibrous Al2O3-ZrO2 Composites on Prolonged High Temperature Exposure.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Korean Journal of Materials Research 2013, 23 (9), p531-536.
    Impact Factor: No IF
  15. Evaluation of formation process of spherical porous biphasic calcium phosphate (BCP) granules by slurry dripping method.
    Swapan Kumar Sarkar, Do-Van Tuyen, Byong-Taek Lee.
    Metals and Materials International 2012, 18 (4), p717-721.
    Impact Factor: 1.647
  16. Microwave sintering and in vitro study of defect-free stable porous multilayered HAp–ZrO2 artificial bone scaffold.
    Dong-Woo Jang, Thi-Hiep Nguyen, Swapan Kumar Sarkar, Byong-Taek Lee.
    Science and Technology of Advanced Materials 2012, 13 (3), 035009.
    Impact Factor: 3.585
  17. Fabrication of novel multilayer Al2O3–(m-ZrO2)/t-ZrO2fibrous ceramics composites.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics International 2012, 38 (2), p1043-1050.
    Impact Factor: 3.057
  18. Formation of TiO2nano fibers on a micro-channeled Al2O3–ZrO2/TiO2 porous composite membrane for photocatalytic filtration.
    Hyun-Jin Hong, Swapan Kumar Sarkar, Byong-Taek Lee.
    Journal of the European Ceramic Society 2012 32 (3), p657-663.
    Impact Factor: 3.794
  19. Comparative Study of Microstructures and Material Properties in the Vacuum and Spark Plasma Sintered Ti-Calcium Phosphate Composites.
    Dibakar Mondal, Swapan Kumar Sarkar, Ik-Hyun Oh, Byong-Taek Lee.
    Materials transactions 2011, 52 (7), p1436-1442.
    Impact Factor: 0.675
  20. Fabrication and characterization of the Ti-Ca-P composites by vacuum sintering.
    Dibakar Mondal, Swapan Kumar Sarkar, Dong-Won Lee, Young-Seon Lee, Byong-Taek Lee.
    Journal of Biomedical Science 2011, 4 p583-590.
    Impact Factor: 5.203
  21. Synthesis of Bioactive Glass by Microwave Energy Irradiation and Its In-Vitro Biocompatibility
    Swapan Kumar Sarkar, ByongTaek Lee
    Bioceramics Development and Applications 2011, 1, p1-3
    Impact Factor: No IF
  22. Co-Axially Laminated Continuously Porous Composites in Al2O3-(m-ZrO2)/t-ZrO2 System for High Mechanical Strength.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Materials transactions 2010, 51 (12), p2168-2172.
    Impact Factor: 0.674
  23. Initial biocompatibility and enhanced osteoblast response of Si doping in a porous BCP bone graft substitute.
    In-SeonByun, Swapan Kumar Sarkar, M AnirbanJyoti, Young-Ki Min, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Journal of Materials Science: Materials in Medicine 2010, 21 (6), p1937-1947.
    Impact Factor: 2.467
  24. Effect of Strontium Doped Porous BCP as Bone Graft Substitutes on Osteoblast.
    In-SeonByun, Swapan Kumar Sarkar, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Korean J. Mater. Res 2010, 20 (3), p155-160.
    Impact Factor: No IF
  25. Evaluation and comparison of the microstructure and mechanical properties of fibrous Al2O3―(m-ZrO2)/t-ZrO2 composites after multiple extrusion steps.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics international 2010, 36 (6), p1971-1976
    Impact Factor: 3.057
  26. Fabrication of super-high-strength microchanneled Al2O3–ZrO2 ceramic composites with fibrous microstructure.
    ByongTaek Lee,Swapan Kumar Sarkar.
    ScriptaMaterialia2009, 61 (7), p686-689

    Impact Factor: 4.539
  27. Fabrication of bioglass infiltrated Al2O3–(m-ZrO2) composites.
    Ho-Yeon Song, Swapan Kumar Sarkar, Min Sung Kim, Young Ki Min, Yang Hun Mo, Byong-Taek Lee.
    Journal of Materials Science: Materials in Medicine 2009, 20 (1), p265-269
    Impact Factor: 2.467
  28. Fabrication of fibrous Al2O3-(m-ZrO2)/HAp-(t-ZrO2) core/shell composites with elongated grain formation.
    Byong-Taek Lee, Chi-Woo Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the Ceramic Society of Japan 2009, 117 (1362), p152-156
    Impact Factor: 0.828
  29. Microstructure and material properties of double-network type fibrous (Al2O3–m-ZrO2)/t-ZrO2 composites.
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the European Ceramic Society 2008, 28 (1), p229-233
    Impact Factor: 3.794
  30. Novel bamboo-like fibrous, micro-channeled and functional gradient microstructure control of ceramics
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Materials transactions 2008, 49 (2), p339-344
    Impact Factor: 0.674
  31. Fabrication and Characterization of Porous TCP coated Al2O3 Scaffold by Polymeric Sponge Method.
    Swapan Kumar Sarkar, Young Hee Kim, Min Sung Kim, Young Ki Min, Hun Mo Yang, Ho-Yeon Song, Byong-Taek Lee.
    Journal of the Korean Ceramic Society 2007, 45 (10), p579-583.
    Impact Factor: No Impact factor
  32. Fabrication and microstructure control of continuously porous ceramics with Al2O3-(m-ZrO2) and t-ZrO2 multilayer shell.
    Swapan Kumar Sarkar, RajatKanti Paul, ByongTaek Lee.
    Solid State Phenomena 2007, 124, p1113-1116.
    Impact Factor: 0.400
  33. Fabrication of CNT-reinforced HAp composites by spark plasma sintering.
    Swapan Kumar Sarkar, Min Ho Youn, Ik Hyun Oh, ByongTaek Lee.
    Materials science forum 2007, 534, p893-896
    Impact Factor: No Impact factor
  34. Core/shell volume effect on the microstructure and mechanical properties of fibrous Al2O3-(m-ZrO2)/t-ZrO2 composite.
    ByongTaek Lee, Swapan Kumar Sarkar, Asit Kumar Gain, Soo-Jae Yim, Ho Yeon Song
    Materials science & engineering. A, 2006,  432(1-2) p 317-323
    Impact Factor: 4.081

  1. In vitro and in vivo assessment of biomedical Mg–Ca alloys for bone implant applications
    P Makkar, SK Sarkar, AR Padalhin, BG Moon, YS Lee, BT Lee
    Journal of applied biomaterials & functional materials, 2018 Jul;16(3):126-136.
    Impact Factor: 1.403
  2. A Study of BMP-2-Loaded Bipotential Electrolytic Complex around a Biphasic Calcium Phosphate-Derived (BCP) Scaffold for Repair of Large Segmental Bone Defect.
    Kallyanashis Paul, Andrew R. Padalhin, Nguyen T. B Linh, Boram Kim, Swapan Kumar Sarkar, ByongTaek Lee
    PLoS ONE 11(10): e0163708. 2016
    Impact Factor: 2.776
  3. Brushite-based calcium phosphate cement with multichannel hydroxyapatite granule loading for improved bone regeneration.
    Swapan Kumar Sarkar, ByungYeol Lee, Andrew ReyasPadalhin, AvikSarker, Nathaniel Carpena, Boram Kim, Kallyanshish Paul, Hwan Jun Choi, Sang-Ho Bae, ByongTaek Lee.
    Journal of BiomaterialsApplication 2016, 30(6) p823-837.
    Impact Factor: 2.442
  4. Synthesis of a novel bioactive glass using the ultrasonic energy assisted hydrothermal method and their biocompatibility evaluation.
    Swapan Kumar Sarkar, Alexander Sadiasa, ByongTaek Lee.
    Journal of Materials Research 2014, 29 (16), p1781-1789.
    Impact Factor: 1.982
  5. Hard tissue regeneration using bone substitutes: an update on innovations in materials.
    Swapan Kumar Sarkar and ByongTaek Lee.
    Korean Journal of Internal Medicine, Vol. 30, No.3, pp 1-15, 2015. (Review paper)
    Impact Factor: 2.131
  6. Effect of rat bone marrow derived–stem cell delivery from serum-loaded oxidized alginate–gelatin– biphasic calcium phosphate hydrogel for bone tissue regeneration using a nude mouse critical-sized calvarial defect model.
    Kallyanashis Paul, Nguyen Thuy Ba Linh, Bo-ram Kim, Swapan Kumar Sarkar, Hwan-Jun Choi, Sang-Ho Bae, Young-Ki Min and Byong-Taek Lee.
    Journal of Bioactive and Compatible Polymers, Vol. 30,No 2,pp. 188-208, 2015.
    Impact Factor: 1.976
  7. Evaluation of the potential anti‐adhesion effect of the PVA/Gelatin membrane.
    Sang‐Ho Bae, So‐Ra Son, Swapan Kumar Sakar, Thi‐Hiep Nguyen, Shin‐Woo Kim, Young‐Ki Min, ByongTaek Lee.
    Journal of Biomedical Materials Research Part B: Applied Biomaterials 2014, 102 (4), p 840-849.
    Impact Factor: 2.674
  8. BMP-2 Immoblized in BCP-Chitosan-Hyaluronic Acid Hybrid Scaffold for Bone Tissue Engineering.
    Subrata Deb Nath, Celine Abueva, Swapan Kumar Sarkar and ByongTaek Lee
    Korean Journal of Materials Research, 2014, 24(12) p704-709.
    Impact Factor: No IF
  9. Platelet-rich plasma encapsulation in hyaluronic acid/gelatin-BCP hydrogel for growth factor delivery in BCP sponge scaffold for bone regeneration.
    So-Ra Son, Swapan Kumar Sarkar, Nguyen Thui Ba Linh, Andrew R Padalhin, Bo-Ram Kim, Hae Il Jung and ByongTaek Lee.
    Journal of biomaterials applications, 2014DOI: 10.1177/0885328214551373.
    Impact Factor: 2.442
  10. The effects of dimethyl 3, 3′-dithiobispropionimidate di-hydrochloride cross-linking of collagen and gelatin coating on porous spherical biphasic calcium phosphate granules.
    Yang Hee Kim, So-Ra Son, Swapan Kumar Sarkar, ByongTaek Lee.
    Journal of biomaterials applications, 2014,  DOI:10.1177/0885328214530483.
    Impact Factor: 2.442
  11. Fabrication of Porous Hydroxyapatite Scaffolds as Artificial Bone Preform and its Biocompatibility Evaluation.
    Dong-Woo Jang, Rose Ann Franco, Swapan Kumar Sarkar, Byong-Taek Lee.
    ASAIO Journal 2014, 60 (2), p 216.
    Impact Factor: 2.494
  12. Bioactive glass incorporation in calcium phosphate cement-based injectable bone substitute for improved in vitro biocompatibility and in vivo bone regeneration.
    Alexander Sadiasa, Swapan Kumar Sarkar, Rose Ann Franco, Young Ki Min, ByongTaek Lee.
    Journal of biomaterials applications 2014, 28 (5), p739-756.
    Impact Factor: 2.442
  13. Fabrication of multilayer ZrO2–biphasic calcium phosphate–poly-caprolactone unidirectional channeled scaffold for bone tissue formation.
    Dibkar Mondal, So-Ra Son, Swapan Kumar Sarkar, Young Ki Min, Hun Mo Yang, ByongTaek Lee.
    Journal of biomaterials applications 2013, 28 (3), p462-472.
    Impact Factor: 2.442
  14. Residual Stress on Concentric Laminated Fibrous Al2O3-ZrO2 Composites on Prolonged High Temperature Exposure.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Korean Journal of Materials Research 2013, 23 (9), p531-536.
    Impact Factor: No IF
  15. Evaluation of formation process of spherical porous biphasic calcium phosphate (BCP) granules by slurry dripping method.
    Swapan Kumar Sarkar, Do-Van Tuyen, Byong-Taek Lee.
    Metals and Materials International 2012, 18 (4), p717-721.
    Impact Factor: 1.647
  16. Microwave sintering and in vitro study of defect-free stable porous multilayered HAp–ZrO2 artificial bone scaffold.
    Dong-Woo Jang, Thi-Hiep Nguyen, Swapan Kumar Sarkar, Byong-Taek Lee.
    Science and Technology of Advanced Materials 2012, 13 (3), 035009.
    Impact Factor: 3.585
  17. Fabrication of novel multilayer Al2O3–(m-ZrO2)/t-ZrO2fibrous ceramics composites.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics International 2012, 38 (2), p1043-1050.
    Impact Factor: 3.057
  18. Formation of TiO2nano fibers on a micro-channeled Al2O3–ZrO2/TiO2 porous composite membrane for photocatalytic filtration.
    Hyun-Jin Hong, Swapan Kumar Sarkar, Byong-Taek Lee.
    Journal of the European Ceramic Society 2012 32 (3), p657-663.
    Impact Factor: 3.794
  19. Comparative Study of Microstructures and Material Properties in the Vacuum and Spark Plasma Sintered Ti-Calcium Phosphate Composites.
    Dibakar Mondal, Swapan Kumar Sarkar, Ik-Hyun Oh, Byong-Taek Lee.
    Materials transactions 2011, 52 (7), p1436-1442.
    Impact Factor: 0.675
  20. Fabrication and characterization of the Ti-Ca-P composites by vacuum sintering.
    Dibakar Mondal, Swapan Kumar Sarkar, Dong-Won Lee, Young-Seon Lee, Byong-Taek Lee.
    Journal of Biomedical Science 2011, 4 p583-590.
    Impact Factor: 5.203
  21. Synthesis of Bioactive Glass by Microwave Energy Irradiation and Its In-Vitro Biocompatibility
    Swapan Kumar Sarkar, ByongTaek Lee
    Bioceramics Development and Applications 2011, 1, p1-3
    Impact Factor: No IF
  22. Co-Axially Laminated Continuously Porous Composites in Al2O3-(m-ZrO2)/t-ZrO2 System for High Mechanical Strength.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Materials transactions 2010, 51 (12), p2168-2172.
    Impact Factor: 0.674
  23. Initial biocompatibility and enhanced osteoblast response of Si doping in a porous BCP bone graft substitute.
    In-SeonByun, Swapan Kumar Sarkar, M AnirbanJyoti, Young-Ki Min, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Journal of Materials Science: Materials in Medicine 2010, 21 (6), p1937-1947.
    Impact Factor: 2.467
  24. Effect of Strontium Doped Porous BCP as Bone Graft Substitutes on Osteoblast.
    In-SeonByun, Swapan Kumar Sarkar, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Korean J. Mater. Res 2010, 20 (3), p155-160.
    Impact Factor: No IF
  25. Evaluation and comparison of the microstructure and mechanical properties of fibrous Al2O3―(m-ZrO2)/t-ZrO2 composites after multiple extrusion steps.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics international 2010, 36 (6), p1971-1976
    Impact Factor: 3.057
  26. Fabrication of super-high-strength microchanneled Al2O3–ZrO2 ceramic composites with fibrous microstructure.
    ByongTaek Lee,Swapan Kumar Sarkar.
    ScriptaMaterialia2009, 61 (7), p686-689

    Impact Factor: 4.539
  27. Fabrication of bioglass infiltrated Al2O3–(m-ZrO2) composites.
    Ho-Yeon Song, Swapan Kumar Sarkar, Min Sung Kim, Young Ki Min, Yang Hun Mo, Byong-Taek Lee.
    Journal of Materials Science: Materials in Medicine 2009, 20 (1), p265-269
    Impact Factor: 2.467
  28. Fabrication of fibrous Al2O3-(m-ZrO2)/HAp-(t-ZrO2) core/shell composites with elongated grain formation.
    Byong-Taek Lee, Chi-Woo Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the Ceramic Society of Japan 2009, 117 (1362), p152-156
    Impact Factor: 0.828
  29. Microstructure and material properties of double-network type fibrous (Al2O3–m-ZrO2)/t-ZrO2 composites.
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the European Ceramic Society 2008, 28 (1), p229-233
    Impact Factor: 3.794
  30. Novel bamboo-like fibrous, micro-channeled and functional gradient microstructure control of ceramics
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Materials transactions 2008, 49 (2), p339-344
    Impact Factor: 0.674
  31. Fabrication and Characterization of Porous TCP coated Al2O3 Scaffold by Polymeric Sponge Method.
    Swapan Kumar Sarkar, Young Hee Kim, Min Sung Kim, Young Ki Min, Hun Mo Yang, Ho-Yeon Song, Byong-Taek Lee.
    Journal of the Korean Ceramic Society 2007, 45 (10), p579-583.
    Impact Factor: No Impact factor
  32. Fabrication and microstructure control of continuously porous ceramics with Al2O3-(m-ZrO2) and t-ZrO2 multilayer shell.
    Swapan Kumar Sarkar, RajatKanti Paul, ByongTaek Lee.
    Solid State Phenomena 2007, 124, p1113-1116.
    Impact Factor: 0.400
  33. Fabrication of CNT-reinforced HAp composites by spark plasma sintering.
    Swapan Kumar Sarkar, Min Ho Youn, Ik Hyun Oh, ByongTaek Lee.
    Materials science forum 2007, 534, p893-896
    Impact Factor: No Impact factor
  34. Core/shell volume effect on the microstructure and mechanical properties of fibrous Al2O3-(m-ZrO2)/t-ZrO2 composite.
    ByongTaek Lee, Swapan Kumar Sarkar, Asit Kumar Gain, Soo-Jae Yim, Ho Yeon Song
    Materials science & engineering. A, 2006,  432(1-2) p 317-323
    Impact Factor: 4.081

  1. In vitro and in vivo assessment of biomedical Mg–Ca alloys for bone implant applications
    P Makkar, SK Sarkar, AR Padalhin, BG Moon, YS Lee, BT Lee
    Journal of applied biomaterials & functional materials, 2018 Jul;16(3):126-136.
    Impact Factor: 1.403
  2. A Study of BMP-2-Loaded Bipotential Electrolytic Complex around a Biphasic Calcium Phosphate-Derived (BCP) Scaffold for Repair of Large Segmental Bone Defect.
    Kallyanashis Paul, Andrew R. Padalhin, Nguyen T. B Linh, Boram Kim, Swapan Kumar Sarkar, ByongTaek Lee
    PLoS ONE 11(10): e0163708. 2016
    Impact Factor: 2.776
  3. Brushite-based calcium phosphate cement with multichannel hydroxyapatite granule loading for improved bone regeneration.
    Swapan Kumar Sarkar, ByungYeol Lee, Andrew ReyasPadalhin, AvikSarker, Nathaniel Carpena, Boram Kim, Kallyanshish Paul, Hwan Jun Choi, Sang-Ho Bae, ByongTaek Lee.
    Journal of BiomaterialsApplication 2016, 30(6) p823-837.
    Impact Factor: 2.442
  4. Synthesis of a novel bioactive glass using the ultrasonic energy assisted hydrothermal method and their biocompatibility evaluation.
    Swapan Kumar Sarkar, Alexander Sadiasa, ByongTaek Lee.
    Journal of Materials Research 2014, 29 (16), p1781-1789.
    Impact Factor: 1.982
  5. Hard tissue regeneration using bone substitutes: an update on innovations in materials.
    Swapan Kumar Sarkar and ByongTaek Lee.
    Korean Journal of Internal Medicine, Vol. 30, No.3, pp 1-15, 2015. (Review paper)
    Impact Factor: 2.131
  6. Effect of rat bone marrow derived–stem cell delivery from serum-loaded oxidized alginate–gelatin– biphasic calcium phosphate hydrogel for bone tissue regeneration using a nude mouse critical-sized calvarial defect model.
    Kallyanashis Paul, Nguyen Thuy Ba Linh, Bo-ram Kim, Swapan Kumar Sarkar, Hwan-Jun Choi, Sang-Ho Bae, Young-Ki Min and Byong-Taek Lee.
    Journal of Bioactive and Compatible Polymers, Vol. 30,No 2,pp. 188-208, 2015.
    Impact Factor: 1.976
  7. Evaluation of the potential anti‐adhesion effect of the PVA/Gelatin membrane.
    Sang‐Ho Bae, So‐Ra Son, Swapan Kumar Sakar, Thi‐Hiep Nguyen, Shin‐Woo Kim, Young‐Ki Min, ByongTaek Lee.
    Journal of Biomedical Materials Research Part B: Applied Biomaterials 2014, 102 (4), p 840-849.
    Impact Factor: 2.674
  8. BMP-2 Immoblized in BCP-Chitosan-Hyaluronic Acid Hybrid Scaffold for Bone Tissue Engineering.
    Subrata Deb Nath, Celine Abueva, Swapan Kumar Sarkar and ByongTaek Lee
    Korean Journal of Materials Research, 2014, 24(12) p704-709.
    Impact Factor: No IF
  9. Platelet-rich plasma encapsulation in hyaluronic acid/gelatin-BCP hydrogel for growth factor delivery in BCP sponge scaffold for bone regeneration.
    So-Ra Son, Swapan Kumar Sarkar, Nguyen Thui Ba Linh, Andrew R Padalhin, Bo-Ram Kim, Hae Il Jung and ByongTaek Lee.
    Journal of biomaterials applications, 2014DOI: 10.1177/0885328214551373.
    Impact Factor: 2.442
  10. The effects of dimethyl 3, 3′-dithiobispropionimidate di-hydrochloride cross-linking of collagen and gelatin coating on porous spherical biphasic calcium phosphate granules.
    Yang Hee Kim, So-Ra Son, Swapan Kumar Sarkar, ByongTaek Lee.
    Journal of biomaterials applications, 2014,  DOI:10.1177/0885328214530483.
    Impact Factor: 2.442
  11. Fabrication of Porous Hydroxyapatite Scaffolds as Artificial Bone Preform and its Biocompatibility Evaluation.
    Dong-Woo Jang, Rose Ann Franco, Swapan Kumar Sarkar, Byong-Taek Lee.
    ASAIO Journal 2014, 60 (2), p 216.
    Impact Factor: 2.494
  12. Bioactive glass incorporation in calcium phosphate cement-based injectable bone substitute for improved in vitro biocompatibility and in vivo bone regeneration.
    Alexander Sadiasa, Swapan Kumar Sarkar, Rose Ann Franco, Young Ki Min, ByongTaek Lee.
    Journal of biomaterials applications 2014, 28 (5), p739-756.
    Impact Factor: 2.442
  13. Fabrication of multilayer ZrO2–biphasic calcium phosphate–poly-caprolactone unidirectional channeled scaffold for bone tissue formation.
    Dibkar Mondal, So-Ra Son, Swapan Kumar Sarkar, Young Ki Min, Hun Mo Yang, ByongTaek Lee.
    Journal of biomaterials applications 2013, 28 (3), p462-472.
    Impact Factor: 2.442
  14. Residual Stress on Concentric Laminated Fibrous Al2O3-ZrO2 Composites on Prolonged High Temperature Exposure.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Korean Journal of Materials Research 2013, 23 (9), p531-536.
    Impact Factor: No IF
  15. Evaluation of formation process of spherical porous biphasic calcium phosphate (BCP) granules by slurry dripping method.
    Swapan Kumar Sarkar, Do-Van Tuyen, Byong-Taek Lee.
    Metals and Materials International 2012, 18 (4), p717-721.
    Impact Factor: 1.647
  16. Microwave sintering and in vitro study of defect-free stable porous multilayered HAp–ZrO2 artificial bone scaffold.
    Dong-Woo Jang, Thi-Hiep Nguyen, Swapan Kumar Sarkar, Byong-Taek Lee.
    Science and Technology of Advanced Materials 2012, 13 (3), 035009.
    Impact Factor: 3.585
  17. Fabrication of novel multilayer Al2O3–(m-ZrO2)/t-ZrO2fibrous ceramics composites.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics International 2012, 38 (2), p1043-1050.
    Impact Factor: 3.057
  18. Formation of TiO2nano fibers on a micro-channeled Al2O3–ZrO2/TiO2 porous composite membrane for photocatalytic filtration.
    Hyun-Jin Hong, Swapan Kumar Sarkar, Byong-Taek Lee.
    Journal of the European Ceramic Society 2012 32 (3), p657-663.
    Impact Factor: 3.794
  19. Comparative Study of Microstructures and Material Properties in the Vacuum and Spark Plasma Sintered Ti-Calcium Phosphate Composites.
    Dibakar Mondal, Swapan Kumar Sarkar, Ik-Hyun Oh, Byong-Taek Lee.
    Materials transactions 2011, 52 (7), p1436-1442.
    Impact Factor: 0.675
  20. Fabrication and characterization of the Ti-Ca-P composites by vacuum sintering.
    Dibakar Mondal, Swapan Kumar Sarkar, Dong-Won Lee, Young-Seon Lee, Byong-Taek Lee.
    Journal of Biomedical Science 2011, 4 p583-590.
    Impact Factor: 5.203
  21. Synthesis of Bioactive Glass by Microwave Energy Irradiation and Its In-Vitro Biocompatibility
    Swapan Kumar Sarkar, ByongTaek Lee
    Bioceramics Development and Applications 2011, 1, p1-3
    Impact Factor: No IF
  22. Co-Axially Laminated Continuously Porous Composites in Al2O3-(m-ZrO2)/t-ZrO2 System for High Mechanical Strength.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Materials transactions 2010, 51 (12), p2168-2172.
    Impact Factor: 0.674
  23. Initial biocompatibility and enhanced osteoblast response of Si doping in a porous BCP bone graft substitute.
    In-SeonByun, Swapan Kumar Sarkar, M AnirbanJyoti, Young-Ki Min, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Journal of Materials Science: Materials in Medicine 2010, 21 (6), p1937-1947.
    Impact Factor: 2.467
  24. Effect of Strontium Doped Porous BCP as Bone Graft Substitutes on Osteoblast.
    In-SeonByun, Swapan Kumar Sarkar, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Korean J. Mater. Res 2010, 20 (3), p155-160.
    Impact Factor: No IF
  25. Evaluation and comparison of the microstructure and mechanical properties of fibrous Al2O3―(m-ZrO2)/t-ZrO2 composites after multiple extrusion steps.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics international 2010, 36 (6), p1971-1976
    Impact Factor: 3.057
  26. Fabrication of super-high-strength microchanneled Al2O3–ZrO2 ceramic composites with fibrous microstructure.
    ByongTaek Lee,Swapan Kumar Sarkar.
    ScriptaMaterialia2009, 61 (7), p686-689

    Impact Factor: 4.539
  27. Fabrication of bioglass infiltrated Al2O3–(m-ZrO2) composites.
    Ho-Yeon Song, Swapan Kumar Sarkar, Min Sung Kim, Young Ki Min, Yang Hun Mo, Byong-Taek Lee.
    Journal of Materials Science: Materials in Medicine 2009, 20 (1), p265-269
    Impact Factor: 2.467
  28. Fabrication of fibrous Al2O3-(m-ZrO2)/HAp-(t-ZrO2) core/shell composites with elongated grain formation.
    Byong-Taek Lee, Chi-Woo Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the Ceramic Society of Japan 2009, 117 (1362), p152-156
    Impact Factor: 0.828
  29. Microstructure and material properties of double-network type fibrous (Al2O3–m-ZrO2)/t-ZrO2 composites.
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the European Ceramic Society 2008, 28 (1), p229-233
    Impact Factor: 3.794
  30. Novel bamboo-like fibrous, micro-channeled and functional gradient microstructure control of ceramics
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Materials transactions 2008, 49 (2), p339-344
    Impact Factor: 0.674
  31. Fabrication and Characterization of Porous TCP coated Al2O3 Scaffold by Polymeric Sponge Method.
    Swapan Kumar Sarkar, Young Hee Kim, Min Sung Kim, Young Ki Min, Hun Mo Yang, Ho-Yeon Song, Byong-Taek Lee.
    Journal of the Korean Ceramic Society 2007, 45 (10), p579-583.
    Impact Factor: No Impact factor
  32. Fabrication and microstructure control of continuously porous ceramics with Al2O3-(m-ZrO2) and t-ZrO2 multilayer shell.
    Swapan Kumar Sarkar, RajatKanti Paul, ByongTaek Lee.
    Solid State Phenomena 2007, 124, p1113-1116.
    Impact Factor: 0.400
  33. Fabrication of CNT-reinforced HAp composites by spark plasma sintering.
    Swapan Kumar Sarkar, Min Ho Youn, Ik Hyun Oh, ByongTaek Lee.
    Materials science forum 2007, 534, p893-896
    Impact Factor: No Impact factor
  34. Core/shell volume effect on the microstructure and mechanical properties of fibrous Al2O3-(m-ZrO2)/t-ZrO2 composite.
    ByongTaek Lee, Swapan Kumar Sarkar, Asit Kumar Gain, Soo-Jae Yim, Ho Yeon Song
    Materials science & engineering. A, 2006,  432(1-2) p 317-323
    Impact Factor: 4.081

  1. In vitro and in vivo assessment of biomedical Mg–Ca alloys for bone implant applications
    P Makkar, SK Sarkar, AR Padalhin, BG Moon, YS Lee, BT Lee
    Journal of applied biomaterials & functional materials, 2018 Jul;16(3):126-136.
    Impact Factor: 1.403
  2. A Study of BMP-2-Loaded Bipotential Electrolytic Complex around a Biphasic Calcium Phosphate-Derived (BCP) Scaffold for Repair of Large Segmental Bone Defect.
    Kallyanashis Paul, Andrew R. Padalhin, Nguyen T. B Linh, Boram Kim, Swapan Kumar Sarkar, ByongTaek Lee
    PLoS ONE 11(10): e0163708. 2016
    Impact Factor: 2.776
  3. Brushite-based calcium phosphate cement with multichannel hydroxyapatite granule loading for improved bone regeneration.
    Swapan Kumar Sarkar, ByungYeol Lee, Andrew ReyasPadalhin, AvikSarker, Nathaniel Carpena, Boram Kim, Kallyanshish Paul, Hwan Jun Choi, Sang-Ho Bae, ByongTaek Lee.
    Journal of BiomaterialsApplication 2016, 30(6) p823-837.
    Impact Factor: 2.442
  4. Synthesis of a novel bioactive glass using the ultrasonic energy assisted hydrothermal method and their biocompatibility evaluation.
    Swapan Kumar Sarkar, Alexander Sadiasa, ByongTaek Lee.
    Journal of Materials Research 2014, 29 (16), p1781-1789.
    Impact Factor: 1.982
  5. Hard tissue regeneration using bone substitutes: an update on innovations in materials.
    Swapan Kumar Sarkar and ByongTaek Lee.
    Korean Journal of Internal Medicine, Vol. 30, No.3, pp 1-15, 2015. (Review paper)
    Impact Factor: 2.131
  6. Effect of rat bone marrow derived–stem cell delivery from serum-loaded oxidized alginate–gelatin– biphasic calcium phosphate hydrogel for bone tissue regeneration using a nude mouse critical-sized calvarial defect model.
    Kallyanashis Paul, Nguyen Thuy Ba Linh, Bo-ram Kim, Swapan Kumar Sarkar, Hwan-Jun Choi, Sang-Ho Bae, Young-Ki Min and Byong-Taek Lee.
    Journal of Bioactive and Compatible Polymers, Vol. 30,No 2,pp. 188-208, 2015.
    Impact Factor: 1.976
  7. Evaluation of the potential anti‐adhesion effect of the PVA/Gelatin membrane.
    Sang‐Ho Bae, So‐Ra Son, Swapan Kumar Sakar, Thi‐Hiep Nguyen, Shin‐Woo Kim, Young‐Ki Min, ByongTaek Lee.
    Journal of Biomedical Materials Research Part B: Applied Biomaterials 2014, 102 (4), p 840-849.
    Impact Factor: 2.674
  8. BMP-2 Immoblized in BCP-Chitosan-Hyaluronic Acid Hybrid Scaffold for Bone Tissue Engineering.
    Subrata Deb Nath, Celine Abueva, Swapan Kumar Sarkar and ByongTaek Lee
    Korean Journal of Materials Research, 2014, 24(12) p704-709.
    Impact Factor: No IF
  9. Platelet-rich plasma encapsulation in hyaluronic acid/gelatin-BCP hydrogel for growth factor delivery in BCP sponge scaffold for bone regeneration.
    So-Ra Son, Swapan Kumar Sarkar, Nguyen Thui Ba Linh, Andrew R Padalhin, Bo-Ram Kim, Hae Il Jung and ByongTaek Lee.
    Journal of biomaterials applications, 2014DOI: 10.1177/0885328214551373.
    Impact Factor: 2.442
  10. The effects of dimethyl 3, 3′-dithiobispropionimidate di-hydrochloride cross-linking of collagen and gelatin coating on porous spherical biphasic calcium phosphate granules.
    Yang Hee Kim, So-Ra Son, Swapan Kumar Sarkar, ByongTaek Lee.
    Journal of biomaterials applications, 2014,  DOI:10.1177/0885328214530483.
    Impact Factor: 2.442
  11. Fabrication of Porous Hydroxyapatite Scaffolds as Artificial Bone Preform and its Biocompatibility Evaluation.
    Dong-Woo Jang, Rose Ann Franco, Swapan Kumar Sarkar, Byong-Taek Lee.
    ASAIO Journal 2014, 60 (2), p 216.
    Impact Factor: 2.494
  12. Bioactive glass incorporation in calcium phosphate cement-based injectable bone substitute for improved in vitro biocompatibility and in vivo bone regeneration.
    Alexander Sadiasa, Swapan Kumar Sarkar, Rose Ann Franco, Young Ki Min, ByongTaek Lee.
    Journal of biomaterials applications 2014, 28 (5), p739-756.
    Impact Factor: 2.442
  13. Fabrication of multilayer ZrO2–biphasic calcium phosphate–poly-caprolactone unidirectional channeled scaffold for bone tissue formation.
    Dibkar Mondal, So-Ra Son, Swapan Kumar Sarkar, Young Ki Min, Hun Mo Yang, ByongTaek Lee.
    Journal of biomaterials applications 2013, 28 (3), p462-472.
    Impact Factor: 2.442
  14. Residual Stress on Concentric Laminated Fibrous Al2O3-ZrO2 Composites on Prolonged High Temperature Exposure.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Korean Journal of Materials Research 2013, 23 (9), p531-536.
    Impact Factor: No IF
  15. Evaluation of formation process of spherical porous biphasic calcium phosphate (BCP) granules by slurry dripping method.
    Swapan Kumar Sarkar, Do-Van Tuyen, Byong-Taek Lee.
    Metals and Materials International 2012, 18 (4), p717-721.
    Impact Factor: 1.647
  16. Microwave sintering and in vitro study of defect-free stable porous multilayered HAp–ZrO2 artificial bone scaffold.
    Dong-Woo Jang, Thi-Hiep Nguyen, Swapan Kumar Sarkar, Byong-Taek Lee.
    Science and Technology of Advanced Materials 2012, 13 (3), 035009.
    Impact Factor: 3.585
  17. Fabrication of novel multilayer Al2O3–(m-ZrO2)/t-ZrO2fibrous ceramics composites.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics International 2012, 38 (2), p1043-1050.
    Impact Factor: 3.057
  18. Formation of TiO2nano fibers on a micro-channeled Al2O3–ZrO2/TiO2 porous composite membrane for photocatalytic filtration.
    Hyun-Jin Hong, Swapan Kumar Sarkar, Byong-Taek Lee.
    Journal of the European Ceramic Society 2012 32 (3), p657-663.
    Impact Factor: 3.794
  19. Comparative Study of Microstructures and Material Properties in the Vacuum and Spark Plasma Sintered Ti-Calcium Phosphate Composites.
    Dibakar Mondal, Swapan Kumar Sarkar, Ik-Hyun Oh, Byong-Taek Lee.
    Materials transactions 2011, 52 (7), p1436-1442.
    Impact Factor: 0.675
  20. Fabrication and characterization of the Ti-Ca-P composites by vacuum sintering.
    Dibakar Mondal, Swapan Kumar Sarkar, Dong-Won Lee, Young-Seon Lee, Byong-Taek Lee.
    Journal of Biomedical Science 2011, 4 p583-590.
    Impact Factor: 5.203
  21. Synthesis of Bioactive Glass by Microwave Energy Irradiation and Its In-Vitro Biocompatibility
    Swapan Kumar Sarkar, ByongTaek Lee
    Bioceramics Development and Applications 2011, 1, p1-3
    Impact Factor: No IF
  22. Co-Axially Laminated Continuously Porous Composites in Al2O3-(m-ZrO2)/t-ZrO2 System for High Mechanical Strength.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Materials transactions 2010, 51 (12), p2168-2172.
    Impact Factor: 0.674
  23. Initial biocompatibility and enhanced osteoblast response of Si doping in a porous BCP bone graft substitute.
    In-SeonByun, Swapan Kumar Sarkar, M AnirbanJyoti, Young-Ki Min, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Journal of Materials Science: Materials in Medicine 2010, 21 (6), p1937-1947.
    Impact Factor: 2.467
  24. Effect of Strontium Doped Porous BCP as Bone Graft Substitutes on Osteoblast.
    In-SeonByun, Swapan Kumar Sarkar, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Korean J. Mater. Res 2010, 20 (3), p155-160.
    Impact Factor: No IF
  25. Evaluation and comparison of the microstructure and mechanical properties of fibrous Al2O3―(m-ZrO2)/t-ZrO2 composites after multiple extrusion steps.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics international 2010, 36 (6), p1971-1976
    Impact Factor: 3.057
  26. Fabrication of super-high-strength microchanneled Al2O3–ZrO2 ceramic composites with fibrous microstructure.
    ByongTaek Lee,Swapan Kumar Sarkar.
    ScriptaMaterialia2009, 61 (7), p686-689

    Impact Factor: 4.539
  27. Fabrication of bioglass infiltrated Al2O3–(m-ZrO2) composites.
    Ho-Yeon Song, Swapan Kumar Sarkar, Min Sung Kim, Young Ki Min, Yang Hun Mo, Byong-Taek Lee.
    Journal of Materials Science: Materials in Medicine 2009, 20 (1), p265-269
    Impact Factor: 2.467
  28. Fabrication of fibrous Al2O3-(m-ZrO2)/HAp-(t-ZrO2) core/shell composites with elongated grain formation.
    Byong-Taek Lee, Chi-Woo Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the Ceramic Society of Japan 2009, 117 (1362), p152-156
    Impact Factor: 0.828
  29. Microstructure and material properties of double-network type fibrous (Al2O3–m-ZrO2)/t-ZrO2 composites.
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the European Ceramic Society 2008, 28 (1), p229-233
    Impact Factor: 3.794
  30. Novel bamboo-like fibrous, micro-channeled and functional gradient microstructure control of ceramics
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Materials transactions 2008, 49 (2), p339-344
    Impact Factor: 0.674
  31. Fabrication and Characterization of Porous TCP coated Al2O3 Scaffold by Polymeric Sponge Method.
    Swapan Kumar Sarkar, Young Hee Kim, Min Sung Kim, Young Ki Min, Hun Mo Yang, Ho-Yeon Song, Byong-Taek Lee.
    Journal of the Korean Ceramic Society 2007, 45 (10), p579-583.
    Impact Factor: No Impact factor
  32. Fabrication and microstructure control of continuously porous ceramics with Al2O3-(m-ZrO2) and t-ZrO2 multilayer shell.
    Swapan Kumar Sarkar, RajatKanti Paul, ByongTaek Lee.
    Solid State Phenomena 2007, 124, p1113-1116.
    Impact Factor: 0.400
  33. Fabrication of CNT-reinforced HAp composites by spark plasma sintering.
    Swapan Kumar Sarkar, Min Ho Youn, Ik Hyun Oh, ByongTaek Lee.
    Materials science forum 2007, 534, p893-896
    Impact Factor: No Impact factor
  34. Core/shell volume effect on the microstructure and mechanical properties of fibrous Al2O3-(m-ZrO2)/t-ZrO2 composite.
    ByongTaek Lee, Swapan Kumar Sarkar, Asit Kumar Gain, Soo-Jae Yim, Ho Yeon Song
    Materials science & engineering. A, 2006,  432(1-2) p 317-323
    Impact Factor: 4.081

  1. In vitro and in vivo assessment of biomedical Mg–Ca alloys for bone implant applications
    P Makkar, SK Sarkar, AR Padalhin, BG Moon, YS Lee, BT Lee
    Journal of applied biomaterials & functional materials, 2018 Jul;16(3):126-136.
    Impact Factor: 1.403
  2. A Study of BMP-2-Loaded Bipotential Electrolytic Complex around a Biphasic Calcium Phosphate-Derived (BCP) Scaffold for Repair of Large Segmental Bone Defect.
    Kallyanashis Paul, Andrew R. Padalhin, Nguyen T. B Linh, Boram Kim, Swapan Kumar Sarkar, ByongTaek Lee
    PLoS ONE 11(10): e0163708. 2016
    Impact Factor: 2.776
  3. Brushite-based calcium phosphate cement with multichannel hydroxyapatite granule loading for improved bone regeneration.
    Swapan Kumar Sarkar, ByungYeol Lee, Andrew ReyasPadalhin, AvikSarker, Nathaniel Carpena, Boram Kim, Kallyanshish Paul, Hwan Jun Choi, Sang-Ho Bae, ByongTaek Lee.
    Journal of BiomaterialsApplication 2016, 30(6) p823-837.
    Impact Factor: 2.442
  4. Synthesis of a novel bioactive glass using the ultrasonic energy assisted hydrothermal method and their biocompatibility evaluation.
    Swapan Kumar Sarkar, Alexander Sadiasa, ByongTaek Lee.
    Journal of Materials Research 2014, 29 (16), p1781-1789.
    Impact Factor: 1.982
  5. Hard tissue regeneration using bone substitutes: an update on innovations in materials.
    Swapan Kumar Sarkar and ByongTaek Lee.
    Korean Journal of Internal Medicine, Vol. 30, No.3, pp 1-15, 2015. (Review paper)
    Impact Factor: 2.131
  6. Effect of rat bone marrow derived–stem cell delivery from serum-loaded oxidized alginate–gelatin– biphasic calcium phosphate hydrogel for bone tissue regeneration using a nude mouse critical-sized calvarial defect model.
    Kallyanashis Paul, Nguyen Thuy Ba Linh, Bo-ram Kim, Swapan Kumar Sarkar, Hwan-Jun Choi, Sang-Ho Bae, Young-Ki Min and Byong-Taek Lee.
    Journal of Bioactive and Compatible Polymers, Vol. 30,No 2,pp. 188-208, 2015.
    Impact Factor: 1.976
  7. Evaluation of the potential anti‐adhesion effect of the PVA/Gelatin membrane.
    Sang‐Ho Bae, So‐Ra Son, Swapan Kumar Sakar, Thi‐Hiep Nguyen, Shin‐Woo Kim, Young‐Ki Min, ByongTaek Lee.
    Journal of Biomedical Materials Research Part B: Applied Biomaterials 2014, 102 (4), p 840-849.
    Impact Factor: 2.674
  8. BMP-2 Immoblized in BCP-Chitosan-Hyaluronic Acid Hybrid Scaffold for Bone Tissue Engineering.
    Subrata Deb Nath, Celine Abueva, Swapan Kumar Sarkar and ByongTaek Lee
    Korean Journal of Materials Research, 2014, 24(12) p704-709.
    Impact Factor: No IF
  9. Platelet-rich plasma encapsulation in hyaluronic acid/gelatin-BCP hydrogel for growth factor delivery in BCP sponge scaffold for bone regeneration.
    So-Ra Son, Swapan Kumar Sarkar, Nguyen Thui Ba Linh, Andrew R Padalhin, Bo-Ram Kim, Hae Il Jung and ByongTaek Lee.
    Journal of biomaterials applications, 2014DOI: 10.1177/0885328214551373.
    Impact Factor: 2.442
  10. The effects of dimethyl 3, 3′-dithiobispropionimidate di-hydrochloride cross-linking of collagen and gelatin coating on porous spherical biphasic calcium phosphate granules.
    Yang Hee Kim, So-Ra Son, Swapan Kumar Sarkar, ByongTaek Lee.
    Journal of biomaterials applications, 2014,  DOI:10.1177/0885328214530483.
    Impact Factor: 2.442
  11. Fabrication of Porous Hydroxyapatite Scaffolds as Artificial Bone Preform and its Biocompatibility Evaluation.
    Dong-Woo Jang, Rose Ann Franco, Swapan Kumar Sarkar, Byong-Taek Lee.
    ASAIO Journal 2014, 60 (2), p 216.
    Impact Factor: 2.494
  12. Bioactive glass incorporation in calcium phosphate cement-based injectable bone substitute for improved in vitro biocompatibility and in vivo bone regeneration.
    Alexander Sadiasa, Swapan Kumar Sarkar, Rose Ann Franco, Young Ki Min, ByongTaek Lee.
    Journal of biomaterials applications 2014, 28 (5), p739-756.
    Impact Factor: 2.442
  13. Fabrication of multilayer ZrO2–biphasic calcium phosphate–poly-caprolactone unidirectional channeled scaffold for bone tissue formation.
    Dibkar Mondal, So-Ra Son, Swapan Kumar Sarkar, Young Ki Min, Hun Mo Yang, ByongTaek Lee.
    Journal of biomaterials applications 2013, 28 (3), p462-472.
    Impact Factor: 2.442
  14. Residual Stress on Concentric Laminated Fibrous Al2O3-ZrO2 Composites on Prolonged High Temperature Exposure.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Korean Journal of Materials Research 2013, 23 (9), p531-536.
    Impact Factor: No IF
  15. Evaluation of formation process of spherical porous biphasic calcium phosphate (BCP) granules by slurry dripping method.
    Swapan Kumar Sarkar, Do-Van Tuyen, Byong-Taek Lee.
    Metals and Materials International 2012, 18 (4), p717-721.
    Impact Factor: 1.647
  16. Microwave sintering and in vitro study of defect-free stable porous multilayered HAp–ZrO2 artificial bone scaffold.
    Dong-Woo Jang, Thi-Hiep Nguyen, Swapan Kumar Sarkar, Byong-Taek Lee.
    Science and Technology of Advanced Materials 2012, 13 (3), 035009.
    Impact Factor: 3.585
  17. Fabrication of novel multilayer Al2O3–(m-ZrO2)/t-ZrO2fibrous ceramics composites.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics International 2012, 38 (2), p1043-1050.
    Impact Factor: 3.057
  18. Formation of TiO2nano fibers on a micro-channeled Al2O3–ZrO2/TiO2 porous composite membrane for photocatalytic filtration.
    Hyun-Jin Hong, Swapan Kumar Sarkar, Byong-Taek Lee.
    Journal of the European Ceramic Society 2012 32 (3), p657-663.
    Impact Factor: 3.794
  19. Comparative Study of Microstructures and Material Properties in the Vacuum and Spark Plasma Sintered Ti-Calcium Phosphate Composites.
    Dibakar Mondal, Swapan Kumar Sarkar, Ik-Hyun Oh, Byong-Taek Lee.
    Materials transactions 2011, 52 (7), p1436-1442.
    Impact Factor: 0.675
  20. Fabrication and characterization of the Ti-Ca-P composites by vacuum sintering.
    Dibakar Mondal, Swapan Kumar Sarkar, Dong-Won Lee, Young-Seon Lee, Byong-Taek Lee.
    Journal of Biomedical Science 2011, 4 p583-590.
    Impact Factor: 5.203
  21. Synthesis of Bioactive Glass by Microwave Energy Irradiation and Its In-Vitro Biocompatibility
    Swapan Kumar Sarkar, ByongTaek Lee
    Bioceramics Development and Applications 2011, 1, p1-3
    Impact Factor: No IF
  22. Co-Axially Laminated Continuously Porous Composites in Al2O3-(m-ZrO2)/t-ZrO2 System for High Mechanical Strength.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Materials transactions 2010, 51 (12), p2168-2172.
    Impact Factor: 0.674
  23. Initial biocompatibility and enhanced osteoblast response of Si doping in a porous BCP bone graft substitute.
    In-SeonByun, Swapan Kumar Sarkar, M AnirbanJyoti, Young-Ki Min, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Journal of Materials Science: Materials in Medicine 2010, 21 (6), p1937-1947.
    Impact Factor: 2.467
  24. Effect of Strontium Doped Porous BCP as Bone Graft Substitutes on Osteoblast.
    In-SeonByun, Swapan Kumar Sarkar, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Korean J. Mater. Res 2010, 20 (3), p155-160.
    Impact Factor: No IF
  25. Evaluation and comparison of the microstructure and mechanical properties of fibrous Al2O3―(m-ZrO2)/t-ZrO2 composites after multiple extrusion steps.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics international 2010, 36 (6), p1971-1976
    Impact Factor: 3.057
  26. Fabrication of super-high-strength microchanneled Al2O3–ZrO2 ceramic composites with fibrous microstructure.
    ByongTaek Lee,Swapan Kumar Sarkar.
    ScriptaMaterialia2009, 61 (7), p686-689

    Impact Factor: 4.539
  27. Fabrication of bioglass infiltrated Al2O3–(m-ZrO2) composites.
    Ho-Yeon Song, Swapan Kumar Sarkar, Min Sung Kim, Young Ki Min, Yang Hun Mo, Byong-Taek Lee.
    Journal of Materials Science: Materials in Medicine 2009, 20 (1), p265-269
    Impact Factor: 2.467
  28. Fabrication of fibrous Al2O3-(m-ZrO2)/HAp-(t-ZrO2) core/shell composites with elongated grain formation.
    Byong-Taek Lee, Chi-Woo Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the Ceramic Society of Japan 2009, 117 (1362), p152-156
    Impact Factor: 0.828
  29. Microstructure and material properties of double-network type fibrous (Al2O3–m-ZrO2)/t-ZrO2 composites.
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the European Ceramic Society 2008, 28 (1), p229-233
    Impact Factor: 3.794
  30. Novel bamboo-like fibrous, micro-channeled and functional gradient microstructure control of ceramics
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Materials transactions 2008, 49 (2), p339-344
    Impact Factor: 0.674
  31. Fabrication and Characterization of Porous TCP coated Al2O3 Scaffold by Polymeric Sponge Method.
    Swapan Kumar Sarkar, Young Hee Kim, Min Sung Kim, Young Ki Min, Hun Mo Yang, Ho-Yeon Song, Byong-Taek Lee.
    Journal of the Korean Ceramic Society 2007, 45 (10), p579-583.
    Impact Factor: No Impact factor
  32. Fabrication and microstructure control of continuously porous ceramics with Al2O3-(m-ZrO2) and t-ZrO2 multilayer shell.
    Swapan Kumar Sarkar, RajatKanti Paul, ByongTaek Lee.
    Solid State Phenomena 2007, 124, p1113-1116.
    Impact Factor: 0.400
  33. Fabrication of CNT-reinforced HAp composites by spark plasma sintering.
    Swapan Kumar Sarkar, Min Ho Youn, Ik Hyun Oh, ByongTaek Lee.
    Materials science forum 2007, 534, p893-896
    Impact Factor: No Impact factor
  34. Core/shell volume effect on the microstructure and mechanical properties of fibrous Al2O3-(m-ZrO2)/t-ZrO2 composite.
    ByongTaek Lee, Swapan Kumar Sarkar, Asit Kumar Gain, Soo-Jae Yim, Ho Yeon Song
    Materials science & engineering. A, 2006,  432(1-2) p 317-323
    Impact Factor: 4.081

  1. In vitro and in vivo assessment of biomedical Mg–Ca alloys for bone implant applications
    P Makkar, SK Sarkar, AR Padalhin, BG Moon, YS Lee, BT Lee
    Journal of applied biomaterials & functional materials, 2018 Jul;16(3):126-136.
    Impact Factor: 1.403
  2. A Study of BMP-2-Loaded Bipotential Electrolytic Complex around a Biphasic Calcium Phosphate-Derived (BCP) Scaffold for Repair of Large Segmental Bone Defect.
    Kallyanashis Paul, Andrew R. Padalhin, Nguyen T. B Linh, Boram Kim, Swapan Kumar Sarkar, ByongTaek Lee
    PLoS ONE 11(10): e0163708. 2016
    Impact Factor: 2.776
  3. Brushite-based calcium phosphate cement with multichannel hydroxyapatite granule loading for improved bone regeneration.
    Swapan Kumar Sarkar, ByungYeol Lee, Andrew ReyasPadalhin, AvikSarker, Nathaniel Carpena, Boram Kim, Kallyanshish Paul, Hwan Jun Choi, Sang-Ho Bae, ByongTaek Lee.
    Journal of BiomaterialsApplication 2016, 30(6) p823-837.
    Impact Factor: 2.442
  4. Synthesis of a novel bioactive glass using the ultrasonic energy assisted hydrothermal method and their biocompatibility evaluation.
    Swapan Kumar Sarkar, Alexander Sadiasa, ByongTaek Lee.
    Journal of Materials Research 2014, 29 (16), p1781-1789.
    Impact Factor: 1.982
  5. Hard tissue regeneration using bone substitutes: an update on innovations in materials.
    Swapan Kumar Sarkar and ByongTaek Lee.
    Korean Journal of Internal Medicine, Vol. 30, No.3, pp 1-15, 2015. (Review paper)
    Impact Factor: 2.131
  6. Effect of rat bone marrow derived–stem cell delivery from serum-loaded oxidized alginate–gelatin– biphasic calcium phosphate hydrogel for bone tissue regeneration using a nude mouse critical-sized calvarial defect model.
    Kallyanashis Paul, Nguyen Thuy Ba Linh, Bo-ram Kim, Swapan Kumar Sarkar, Hwan-Jun Choi, Sang-Ho Bae, Young-Ki Min and Byong-Taek Lee.
    Journal of Bioactive and Compatible Polymers, Vol. 30,No 2,pp. 188-208, 2015.
    Impact Factor: 1.976
  7. Evaluation of the potential anti‐adhesion effect of the PVA/Gelatin membrane.
    Sang‐Ho Bae, So‐Ra Son, Swapan Kumar Sakar, Thi‐Hiep Nguyen, Shin‐Woo Kim, Young‐Ki Min, ByongTaek Lee.
    Journal of Biomedical Materials Research Part B: Applied Biomaterials 2014, 102 (4), p 840-849.
    Impact Factor: 2.674
  8. BMP-2 Immoblized in BCP-Chitosan-Hyaluronic Acid Hybrid Scaffold for Bone Tissue Engineering.
    Subrata Deb Nath, Celine Abueva, Swapan Kumar Sarkar and ByongTaek Lee
    Korean Journal of Materials Research, 2014, 24(12) p704-709.
    Impact Factor: No IF
  9. Platelet-rich plasma encapsulation in hyaluronic acid/gelatin-BCP hydrogel for growth factor delivery in BCP sponge scaffold for bone regeneration.
    So-Ra Son, Swapan Kumar Sarkar, Nguyen Thui Ba Linh, Andrew R Padalhin, Bo-Ram Kim, Hae Il Jung and ByongTaek Lee.
    Journal of biomaterials applications, 2014DOI: 10.1177/0885328214551373.
    Impact Factor: 2.442
  10. The effects of dimethyl 3, 3′-dithiobispropionimidate di-hydrochloride cross-linking of collagen and gelatin coating on porous spherical biphasic calcium phosphate granules.
    Yang Hee Kim, So-Ra Son, Swapan Kumar Sarkar, ByongTaek Lee.
    Journal of biomaterials applications, 2014,  DOI:10.1177/0885328214530483.
    Impact Factor: 2.442
  11. Fabrication of Porous Hydroxyapatite Scaffolds as Artificial Bone Preform and its Biocompatibility Evaluation.
    Dong-Woo Jang, Rose Ann Franco, Swapan Kumar Sarkar, Byong-Taek Lee.
    ASAIO Journal 2014, 60 (2), p 216.
    Impact Factor: 2.494
  12. Bioactive glass incorporation in calcium phosphate cement-based injectable bone substitute for improved in vitro biocompatibility and in vivo bone regeneration.
    Alexander Sadiasa, Swapan Kumar Sarkar, Rose Ann Franco, Young Ki Min, ByongTaek Lee.
    Journal of biomaterials applications 2014, 28 (5), p739-756.
    Impact Factor: 2.442
  13. Fabrication of multilayer ZrO2–biphasic calcium phosphate–poly-caprolactone unidirectional channeled scaffold for bone tissue formation.
    Dibkar Mondal, So-Ra Son, Swapan Kumar Sarkar, Young Ki Min, Hun Mo Yang, ByongTaek Lee.
    Journal of biomaterials applications 2013, 28 (3), p462-472.
    Impact Factor: 2.442
  14. Residual Stress on Concentric Laminated Fibrous Al2O3-ZrO2 Composites on Prolonged High Temperature Exposure.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Korean Journal of Materials Research 2013, 23 (9), p531-536.
    Impact Factor: No IF
  15. Evaluation of formation process of spherical porous biphasic calcium phosphate (BCP) granules by slurry dripping method.
    Swapan Kumar Sarkar, Do-Van Tuyen, Byong-Taek Lee.
    Metals and Materials International 2012, 18 (4), p717-721.
    Impact Factor: 1.647
  16. Microwave sintering and in vitro study of defect-free stable porous multilayered HAp–ZrO2 artificial bone scaffold.
    Dong-Woo Jang, Thi-Hiep Nguyen, Swapan Kumar Sarkar, Byong-Taek Lee.
    Science and Technology of Advanced Materials 2012, 13 (3), 035009.
    Impact Factor: 3.585
  17. Fabrication of novel multilayer Al2O3–(m-ZrO2)/t-ZrO2fibrous ceramics composites.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics International 2012, 38 (2), p1043-1050.
    Impact Factor: 3.057
  18. Formation of TiO2nano fibers on a micro-channeled Al2O3–ZrO2/TiO2 porous composite membrane for photocatalytic filtration.
    Hyun-Jin Hong, Swapan Kumar Sarkar, Byong-Taek Lee.
    Journal of the European Ceramic Society 2012 32 (3), p657-663.
    Impact Factor: 3.794
  19. Comparative Study of Microstructures and Material Properties in the Vacuum and Spark Plasma Sintered Ti-Calcium Phosphate Composites.
    Dibakar Mondal, Swapan Kumar Sarkar, Ik-Hyun Oh, Byong-Taek Lee.
    Materials transactions 2011, 52 (7), p1436-1442.
    Impact Factor: 0.675
  20. Fabrication and characterization of the Ti-Ca-P composites by vacuum sintering.
    Dibakar Mondal, Swapan Kumar Sarkar, Dong-Won Lee, Young-Seon Lee, Byong-Taek Lee.
    Journal of Biomedical Science 2011, 4 p583-590.
    Impact Factor: 5.203
  21. Synthesis of Bioactive Glass by Microwave Energy Irradiation and Its In-Vitro Biocompatibility
    Swapan Kumar Sarkar, ByongTaek Lee
    Bioceramics Development and Applications 2011, 1, p1-3
    Impact Factor: No IF
  22. Co-Axially Laminated Continuously Porous Composites in Al2O3-(m-ZrO2)/t-ZrO2 System for High Mechanical Strength.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Materials transactions 2010, 51 (12), p2168-2172.
    Impact Factor: 0.674
  23. Initial biocompatibility and enhanced osteoblast response of Si doping in a porous BCP bone graft substitute.
    In-SeonByun, Swapan Kumar Sarkar, M AnirbanJyoti, Young-Ki Min, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Journal of Materials Science: Materials in Medicine 2010, 21 (6), p1937-1947.
    Impact Factor: 2.467
  24. Effect of Strontium Doped Porous BCP as Bone Graft Substitutes on Osteoblast.
    In-SeonByun, Swapan Kumar Sarkar, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Korean J. Mater. Res 2010, 20 (3), p155-160.
    Impact Factor: No IF
  25. Evaluation and comparison of the microstructure and mechanical properties of fibrous Al2O3―(m-ZrO2)/t-ZrO2 composites after multiple extrusion steps.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics international 2010, 36 (6), p1971-1976
    Impact Factor: 3.057
  26. Fabrication of super-high-strength microchanneled Al2O3–ZrO2 ceramic composites with fibrous microstructure.
    ByongTaek Lee,Swapan Kumar Sarkar.
    ScriptaMaterialia2009, 61 (7), p686-689

    Impact Factor: 4.539
  27. Fabrication of bioglass infiltrated Al2O3–(m-ZrO2) composites.
    Ho-Yeon Song, Swapan Kumar Sarkar, Min Sung Kim, Young Ki Min, Yang Hun Mo, Byong-Taek Lee.
    Journal of Materials Science: Materials in Medicine 2009, 20 (1), p265-269
    Impact Factor: 2.467
  28. Fabrication of fibrous Al2O3-(m-ZrO2)/HAp-(t-ZrO2) core/shell composites with elongated grain formation.
    Byong-Taek Lee, Chi-Woo Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the Ceramic Society of Japan 2009, 117 (1362), p152-156
    Impact Factor: 0.828
  29. Microstructure and material properties of double-network type fibrous (Al2O3–m-ZrO2)/t-ZrO2 composites.
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the European Ceramic Society 2008, 28 (1), p229-233
    Impact Factor: 3.794
  30. Novel bamboo-like fibrous, micro-channeled and functional gradient microstructure control of ceramics
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Materials transactions 2008, 49 (2), p339-344
    Impact Factor: 0.674
  31. Fabrication and Characterization of Porous TCP coated Al2O3 Scaffold by Polymeric Sponge Method.
    Swapan Kumar Sarkar, Young Hee Kim, Min Sung Kim, Young Ki Min, Hun Mo Yang, Ho-Yeon Song, Byong-Taek Lee.
    Journal of the Korean Ceramic Society 2007, 45 (10), p579-583.
    Impact Factor: No Impact factor
  32. Fabrication and microstructure control of continuously porous ceramics with Al2O3-(m-ZrO2) and t-ZrO2 multilayer shell.
    Swapan Kumar Sarkar, RajatKanti Paul, ByongTaek Lee.
    Solid State Phenomena 2007, 124, p1113-1116.
    Impact Factor: 0.400
  33. Fabrication of CNT-reinforced HAp composites by spark plasma sintering.
    Swapan Kumar Sarkar, Min Ho Youn, Ik Hyun Oh, ByongTaek Lee.
    Materials science forum 2007, 534, p893-896
    Impact Factor: No Impact factor
  34. Core/shell volume effect on the microstructure and mechanical properties of fibrous Al2O3-(m-ZrO2)/t-ZrO2 composite.
    ByongTaek Lee, Swapan Kumar Sarkar, Asit Kumar Gain, Soo-Jae Yim, Ho Yeon Song
    Materials science & engineering. A, 2006,  432(1-2) p 317-323
    Impact Factor: 4.081

  1. In vitro and in vivo assessment of biomedical Mg–Ca alloys for bone implant applications
    P Makkar, SK Sarkar, AR Padalhin, BG Moon, YS Lee, BT Lee
    Journal of applied biomaterials & functional materials, 2018 Jul;16(3):126-136.
    Impact Factor: 1.403
  2. A Study of BMP-2-Loaded Bipotential Electrolytic Complex around a Biphasic Calcium Phosphate-Derived (BCP) Scaffold for Repair of Large Segmental Bone Defect.
    Kallyanashis Paul, Andrew R. Padalhin, Nguyen T. B Linh, Boram Kim, Swapan Kumar Sarkar, ByongTaek Lee
    PLoS ONE 11(10): e0163708. 2016
    Impact Factor: 2.776
  3. Brushite-based calcium phosphate cement with multichannel hydroxyapatite granule loading for improved bone regeneration.
    Swapan Kumar Sarkar, ByungYeol Lee, Andrew ReyasPadalhin, AvikSarker, Nathaniel Carpena, Boram Kim, Kallyanshish Paul, Hwan Jun Choi, Sang-Ho Bae, ByongTaek Lee.
    Journal of BiomaterialsApplication 2016, 30(6) p823-837.
    Impact Factor: 2.442
  4. Synthesis of a novel bioactive glass using the ultrasonic energy assisted hydrothermal method and their biocompatibility evaluation.
    Swapan Kumar Sarkar, Alexander Sadiasa, ByongTaek Lee.
    Journal of Materials Research 2014, 29 (16), p1781-1789.
    Impact Factor: 1.982
  5. Hard tissue regeneration using bone substitutes: an update on innovations in materials.
    Swapan Kumar Sarkar and ByongTaek Lee.
    Korean Journal of Internal Medicine, Vol. 30, No.3, pp 1-15, 2015. (Review paper)
    Impact Factor: 2.131
  6. Effect of rat bone marrow derived–stem cell delivery from serum-loaded oxidized alginate–gelatin– biphasic calcium phosphate hydrogel for bone tissue regeneration using a nude mouse critical-sized calvarial defect model.
    Kallyanashis Paul, Nguyen Thuy Ba Linh, Bo-ram Kim, Swapan Kumar Sarkar, Hwan-Jun Choi, Sang-Ho Bae, Young-Ki Min and Byong-Taek Lee.
    Journal of Bioactive and Compatible Polymers, Vol. 30,No 2,pp. 188-208, 2015.
    Impact Factor: 1.976
  7. Evaluation of the potential anti‐adhesion effect of the PVA/Gelatin membrane.
    Sang‐Ho Bae, So‐Ra Son, Swapan Kumar Sakar, Thi‐Hiep Nguyen, Shin‐Woo Kim, Young‐Ki Min, ByongTaek Lee.
    Journal of Biomedical Materials Research Part B: Applied Biomaterials 2014, 102 (4), p 840-849.
    Impact Factor: 2.674
  8. BMP-2 Immoblized in BCP-Chitosan-Hyaluronic Acid Hybrid Scaffold for Bone Tissue Engineering.
    Subrata Deb Nath, Celine Abueva, Swapan Kumar Sarkar and ByongTaek Lee
    Korean Journal of Materials Research, 2014, 24(12) p704-709.
    Impact Factor: No IF
  9. Platelet-rich plasma encapsulation in hyaluronic acid/gelatin-BCP hydrogel for growth factor delivery in BCP sponge scaffold for bone regeneration.
    So-Ra Son, Swapan Kumar Sarkar, Nguyen Thui Ba Linh, Andrew R Padalhin, Bo-Ram Kim, Hae Il Jung and ByongTaek Lee.
    Journal of biomaterials applications, 2014DOI: 10.1177/0885328214551373.
    Impact Factor: 2.442
  10. The effects of dimethyl 3, 3′-dithiobispropionimidate di-hydrochloride cross-linking of collagen and gelatin coating on porous spherical biphasic calcium phosphate granules.
    Yang Hee Kim, So-Ra Son, Swapan Kumar Sarkar, ByongTaek Lee.
    Journal of biomaterials applications, 2014,  DOI:10.1177/0885328214530483.
    Impact Factor: 2.442
  11. Fabrication of Porous Hydroxyapatite Scaffolds as Artificial Bone Preform and its Biocompatibility Evaluation.
    Dong-Woo Jang, Rose Ann Franco, Swapan Kumar Sarkar, Byong-Taek Lee.
    ASAIO Journal 2014, 60 (2), p 216.
    Impact Factor: 2.494
  12. Bioactive glass incorporation in calcium phosphate cement-based injectable bone substitute for improved in vitro biocompatibility and in vivo bone regeneration.
    Alexander Sadiasa, Swapan Kumar Sarkar, Rose Ann Franco, Young Ki Min, ByongTaek Lee.
    Journal of biomaterials applications 2014, 28 (5), p739-756.
    Impact Factor: 2.442
  13. Fabrication of multilayer ZrO2–biphasic calcium phosphate–poly-caprolactone unidirectional channeled scaffold for bone tissue formation.
    Dibkar Mondal, So-Ra Son, Swapan Kumar Sarkar, Young Ki Min, Hun Mo Yang, ByongTaek Lee.
    Journal of biomaterials applications 2013, 28 (3), p462-472.
    Impact Factor: 2.442
  14. Residual Stress on Concentric Laminated Fibrous Al2O3-ZrO2 Composites on Prolonged High Temperature Exposure.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Korean Journal of Materials Research 2013, 23 (9), p531-536.
    Impact Factor: No IF
  15. Evaluation of formation process of spherical porous biphasic calcium phosphate (BCP) granules by slurry dripping method.
    Swapan Kumar Sarkar, Do-Van Tuyen, Byong-Taek Lee.
    Metals and Materials International 2012, 18 (4), p717-721.
    Impact Factor: 1.647
  16. Microwave sintering and in vitro study of defect-free stable porous multilayered HAp–ZrO2 artificial bone scaffold.
    Dong-Woo Jang, Thi-Hiep Nguyen, Swapan Kumar Sarkar, Byong-Taek Lee.
    Science and Technology of Advanced Materials 2012, 13 (3), 035009.
    Impact Factor: 3.585
  17. Fabrication of novel multilayer Al2O3–(m-ZrO2)/t-ZrO2fibrous ceramics composites.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics International 2012, 38 (2), p1043-1050.
    Impact Factor: 3.057
  18. Formation of TiO2nano fibers on a micro-channeled Al2O3–ZrO2/TiO2 porous composite membrane for photocatalytic filtration.
    Hyun-Jin Hong, Swapan Kumar Sarkar, Byong-Taek Lee.
    Journal of the European Ceramic Society 2012 32 (3), p657-663.
    Impact Factor: 3.794
  19. Comparative Study of Microstructures and Material Properties in the Vacuum and Spark Plasma Sintered Ti-Calcium Phosphate Composites.
    Dibakar Mondal, Swapan Kumar Sarkar, Ik-Hyun Oh, Byong-Taek Lee.
    Materials transactions 2011, 52 (7), p1436-1442.
    Impact Factor: 0.675
  20. Fabrication and characterization of the Ti-Ca-P composites by vacuum sintering.
    Dibakar Mondal, Swapan Kumar Sarkar, Dong-Won Lee, Young-Seon Lee, Byong-Taek Lee.
    Journal of Biomedical Science 2011, 4 p583-590.
    Impact Factor: 5.203
  21. Synthesis of Bioactive Glass by Microwave Energy Irradiation and Its In-Vitro Biocompatibility
    Swapan Kumar Sarkar, ByongTaek Lee
    Bioceramics Development and Applications 2011, 1, p1-3
    Impact Factor: No IF
  22. Co-Axially Laminated Continuously Porous Composites in Al2O3-(m-ZrO2)/t-ZrO2 System for High Mechanical Strength.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Materials transactions 2010, 51 (12), p2168-2172.
    Impact Factor: 0.674
  23. Initial biocompatibility and enhanced osteoblast response of Si doping in a porous BCP bone graft substitute.
    In-SeonByun, Swapan Kumar Sarkar, M AnirbanJyoti, Young-Ki Min, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Journal of Materials Science: Materials in Medicine 2010, 21 (6), p1937-1947.
    Impact Factor: 2.467
  24. Effect of Strontium Doped Porous BCP as Bone Graft Substitutes on Osteoblast.
    In-SeonByun, Swapan Kumar Sarkar, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Korean J. Mater. Res 2010, 20 (3), p155-160.
    Impact Factor: No IF
  25. Evaluation and comparison of the microstructure and mechanical properties of fibrous Al2O3―(m-ZrO2)/t-ZrO2 composites after multiple extrusion steps.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics international 2010, 36 (6), p1971-1976
    Impact Factor: 3.057
  26. Fabrication of super-high-strength microchanneled Al2O3–ZrO2 ceramic composites with fibrous microstructure.
    ByongTaek Lee,Swapan Kumar Sarkar.
    ScriptaMaterialia2009, 61 (7), p686-689

    Impact Factor: 4.539
  27. Fabrication of bioglass infiltrated Al2O3–(m-ZrO2) composites.
    Ho-Yeon Song, Swapan Kumar Sarkar, Min Sung Kim, Young Ki Min, Yang Hun Mo, Byong-Taek Lee.
    Journal of Materials Science: Materials in Medicine 2009, 20 (1), p265-269
    Impact Factor: 2.467
  28. Fabrication of fibrous Al2O3-(m-ZrO2)/HAp-(t-ZrO2) core/shell composites with elongated grain formation.
    Byong-Taek Lee, Chi-Woo Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the Ceramic Society of Japan 2009, 117 (1362), p152-156
    Impact Factor: 0.828
  29. Microstructure and material properties of double-network type fibrous (Al2O3–m-ZrO2)/t-ZrO2 composites.
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the European Ceramic Society 2008, 28 (1), p229-233
    Impact Factor: 3.794
  30. Novel bamboo-like fibrous, micro-channeled and functional gradient microstructure control of ceramics
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Materials transactions 2008, 49 (2), p339-344
    Impact Factor: 0.674
  31. Fabrication and Characterization of Porous TCP coated Al2O3 Scaffold by Polymeric Sponge Method.
    Swapan Kumar Sarkar, Young Hee Kim, Min Sung Kim, Young Ki Min, Hun Mo Yang, Ho-Yeon Song, Byong-Taek Lee.
    Journal of the Korean Ceramic Society 2007, 45 (10), p579-583.
    Impact Factor: No Impact factor
  32. Fabrication and microstructure control of continuously porous ceramics with Al2O3-(m-ZrO2) and t-ZrO2 multilayer shell.
    Swapan Kumar Sarkar, RajatKanti Paul, ByongTaek Lee.
    Solid State Phenomena 2007, 124, p1113-1116.
    Impact Factor: 0.400
  33. Fabrication of CNT-reinforced HAp composites by spark plasma sintering.
    Swapan Kumar Sarkar, Min Ho Youn, Ik Hyun Oh, ByongTaek Lee.
    Materials science forum 2007, 534, p893-896
    Impact Factor: No Impact factor
  34. Core/shell volume effect on the microstructure and mechanical properties of fibrous Al2O3-(m-ZrO2)/t-ZrO2 composite.
    ByongTaek Lee, Swapan Kumar Sarkar, Asit Kumar Gain, Soo-Jae Yim, Ho Yeon Song
    Materials science & engineering. A, 2006,  432(1-2) p 317-323
    Impact Factor: 4.081

  1. In vitro and in vivo assessment of biomedical Mg–Ca alloys for bone implant applications
    P Makkar, SK Sarkar, AR Padalhin, BG Moon, YS Lee, BT Lee
    Journal of applied biomaterials & functional materials, 2018 Jul;16(3):126-136.
    Impact Factor: 1.403
  2. A Study of BMP-2-Loaded Bipotential Electrolytic Complex around a Biphasic Calcium Phosphate-Derived (BCP) Scaffold for Repair of Large Segmental Bone Defect.
    Kallyanashis Paul, Andrew R. Padalhin, Nguyen T. B Linh, Boram Kim, Swapan Kumar Sarkar, ByongTaek Lee
    PLoS ONE 11(10): e0163708. 2016
    Impact Factor: 2.776
  3. Brushite-based calcium phosphate cement with multichannel hydroxyapatite granule loading for improved bone regeneration.
    Swapan Kumar Sarkar, ByungYeol Lee, Andrew ReyasPadalhin, AvikSarker, Nathaniel Carpena, Boram Kim, Kallyanshish Paul, Hwan Jun Choi, Sang-Ho Bae, ByongTaek Lee.
    Journal of BiomaterialsApplication 2016, 30(6) p823-837.
    Impact Factor: 2.442
  4. Synthesis of a novel bioactive glass using the ultrasonic energy assisted hydrothermal method and their biocompatibility evaluation.
    Swapan Kumar Sarkar, Alexander Sadiasa, ByongTaek Lee.
    Journal of Materials Research 2014, 29 (16), p1781-1789.
    Impact Factor: 1.982
  5. Hard tissue regeneration using bone substitutes: an update on innovations in materials.
    Swapan Kumar Sarkar and ByongTaek Lee.
    Korean Journal of Internal Medicine, Vol. 30, No.3, pp 1-15, 2015. (Review paper)
    Impact Factor: 2.131
  6. Effect of rat bone marrow derived–stem cell delivery from serum-loaded oxidized alginate–gelatin– biphasic calcium phosphate hydrogel for bone tissue regeneration using a nude mouse critical-sized calvarial defect model.
    Kallyanashis Paul, Nguyen Thuy Ba Linh, Bo-ram Kim, Swapan Kumar Sarkar, Hwan-Jun Choi, Sang-Ho Bae, Young-Ki Min and Byong-Taek Lee.
    Journal of Bioactive and Compatible Polymers, Vol. 30,No 2,pp. 188-208, 2015.
    Impact Factor: 1.976
  7. Evaluation of the potential anti‐adhesion effect of the PVA/Gelatin membrane.
    Sang‐Ho Bae, So‐Ra Son, Swapan Kumar Sakar, Thi‐Hiep Nguyen, Shin‐Woo Kim, Young‐Ki Min, ByongTaek Lee.
    Journal of Biomedical Materials Research Part B: Applied Biomaterials 2014, 102 (4), p 840-849.
    Impact Factor: 2.674
  8. BMP-2 Immoblized in BCP-Chitosan-Hyaluronic Acid Hybrid Scaffold for Bone Tissue Engineering.
    Subrata Deb Nath, Celine Abueva, Swapan Kumar Sarkar and ByongTaek Lee
    Korean Journal of Materials Research, 2014, 24(12) p704-709.
    Impact Factor: No IF
  9. Platelet-rich plasma encapsulation in hyaluronic acid/gelatin-BCP hydrogel for growth factor delivery in BCP sponge scaffold for bone regeneration.
    So-Ra Son, Swapan Kumar Sarkar, Nguyen Thui Ba Linh, Andrew R Padalhin, Bo-Ram Kim, Hae Il Jung and ByongTaek Lee.
    Journal of biomaterials applications, 2014DOI: 10.1177/0885328214551373.
    Impact Factor: 2.442
  10. The effects of dimethyl 3, 3′-dithiobispropionimidate di-hydrochloride cross-linking of collagen and gelatin coating on porous spherical biphasic calcium phosphate granules.
    Yang Hee Kim, So-Ra Son, Swapan Kumar Sarkar, ByongTaek Lee.
    Journal of biomaterials applications, 2014,  DOI:10.1177/0885328214530483.
    Impact Factor: 2.442
  11. Fabrication of Porous Hydroxyapatite Scaffolds as Artificial Bone Preform and its Biocompatibility Evaluation.
    Dong-Woo Jang, Rose Ann Franco, Swapan Kumar Sarkar, Byong-Taek Lee.
    ASAIO Journal 2014, 60 (2), p 216.
    Impact Factor: 2.494
  12. Bioactive glass incorporation in calcium phosphate cement-based injectable bone substitute for improved in vitro biocompatibility and in vivo bone regeneration.
    Alexander Sadiasa, Swapan Kumar Sarkar, Rose Ann Franco, Young Ki Min, ByongTaek Lee.
    Journal of biomaterials applications 2014, 28 (5), p739-756.
    Impact Factor: 2.442
  13. Fabrication of multilayer ZrO2–biphasic calcium phosphate–poly-caprolactone unidirectional channeled scaffold for bone tissue formation.
    Dibkar Mondal, So-Ra Son, Swapan Kumar Sarkar, Young Ki Min, Hun Mo Yang, ByongTaek Lee.
    Journal of biomaterials applications 2013, 28 (3), p462-472.
    Impact Factor: 2.442
  14. Residual Stress on Concentric Laminated Fibrous Al2O3-ZrO2 Composites on Prolonged High Temperature Exposure.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Korean Journal of Materials Research 2013, 23 (9), p531-536.
    Impact Factor: No IF
  15. Evaluation of formation process of spherical porous biphasic calcium phosphate (BCP) granules by slurry dripping method.
    Swapan Kumar Sarkar, Do-Van Tuyen, Byong-Taek Lee.
    Metals and Materials International 2012, 18 (4), p717-721.
    Impact Factor: 1.647
  16. Microwave sintering and in vitro study of defect-free stable porous multilayered HAp–ZrO2 artificial bone scaffold.
    Dong-Woo Jang, Thi-Hiep Nguyen, Swapan Kumar Sarkar, Byong-Taek Lee.
    Science and Technology of Advanced Materials 2012, 13 (3), 035009.
    Impact Factor: 3.585
  17. Fabrication of novel multilayer Al2O3–(m-ZrO2)/t-ZrO2fibrous ceramics composites.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics International 2012, 38 (2), p1043-1050.
    Impact Factor: 3.057
  18. Formation of TiO2nano fibers on a micro-channeled Al2O3–ZrO2/TiO2 porous composite membrane for photocatalytic filtration.
    Hyun-Jin Hong, Swapan Kumar Sarkar, Byong-Taek Lee.
    Journal of the European Ceramic Society 2012 32 (3), p657-663.
    Impact Factor: 3.794
  19. Comparative Study of Microstructures and Material Properties in the Vacuum and Spark Plasma Sintered Ti-Calcium Phosphate Composites.
    Dibakar Mondal, Swapan Kumar Sarkar, Ik-Hyun Oh, Byong-Taek Lee.
    Materials transactions 2011, 52 (7), p1436-1442.
    Impact Factor: 0.675
  20. Fabrication and characterization of the Ti-Ca-P composites by vacuum sintering.
    Dibakar Mondal, Swapan Kumar Sarkar, Dong-Won Lee, Young-Seon Lee, Byong-Taek Lee.
    Journal of Biomedical Science 2011, 4 p583-590.
    Impact Factor: 5.203
  21. Synthesis of Bioactive Glass by Microwave Energy Irradiation and Its In-Vitro Biocompatibility
    Swapan Kumar Sarkar, ByongTaek Lee
    Bioceramics Development and Applications 2011, 1, p1-3
    Impact Factor: No IF
  22. Co-Axially Laminated Continuously Porous Composites in Al2O3-(m-ZrO2)/t-ZrO2 System for High Mechanical Strength.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Materials transactions 2010, 51 (12), p2168-2172.
    Impact Factor: 0.674
  23. Initial biocompatibility and enhanced osteoblast response of Si doping in a porous BCP bone graft substitute.
    In-SeonByun, Swapan Kumar Sarkar, M AnirbanJyoti, Young-Ki Min, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Journal of Materials Science: Materials in Medicine 2010, 21 (6), p1937-1947.
    Impact Factor: 2.467
  24. Effect of Strontium Doped Porous BCP as Bone Graft Substitutes on Osteoblast.
    In-SeonByun, Swapan Kumar Sarkar, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Korean J. Mater. Res 2010, 20 (3), p155-160.
    Impact Factor: No IF
  25. Evaluation and comparison of the microstructure and mechanical properties of fibrous Al2O3―(m-ZrO2)/t-ZrO2 composites after multiple extrusion steps.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics international 2010, 36 (6), p1971-1976
    Impact Factor: 3.057
  26. Fabrication of super-high-strength microchanneled Al2O3–ZrO2 ceramic composites with fibrous microstructure.
    ByongTaek Lee,Swapan Kumar Sarkar.
    ScriptaMaterialia2009, 61 (7), p686-689

    Impact Factor: 4.539
  27. Fabrication of bioglass infiltrated Al2O3–(m-ZrO2) composites.
    Ho-Yeon Song, Swapan Kumar Sarkar, Min Sung Kim, Young Ki Min, Yang Hun Mo, Byong-Taek Lee.
    Journal of Materials Science: Materials in Medicine 2009, 20 (1), p265-269
    Impact Factor: 2.467
  28. Fabrication of fibrous Al2O3-(m-ZrO2)/HAp-(t-ZrO2) core/shell composites with elongated grain formation.
    Byong-Taek Lee, Chi-Woo Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the Ceramic Society of Japan 2009, 117 (1362), p152-156
    Impact Factor: 0.828
  29. Microstructure and material properties of double-network type fibrous (Al2O3–m-ZrO2)/t-ZrO2 composites.
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the European Ceramic Society 2008, 28 (1), p229-233
    Impact Factor: 3.794
  30. Novel bamboo-like fibrous, micro-channeled and functional gradient microstructure control of ceramics
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Materials transactions 2008, 49 (2), p339-344
    Impact Factor: 0.674
  31. Fabrication and Characterization of Porous TCP coated Al2O3 Scaffold by Polymeric Sponge Method.
    Swapan Kumar Sarkar, Young Hee Kim, Min Sung Kim, Young Ki Min, Hun Mo Yang, Ho-Yeon Song, Byong-Taek Lee.
    Journal of the Korean Ceramic Society 2007, 45 (10), p579-583.
    Impact Factor: No Impact factor
  32. Fabrication and microstructure control of continuously porous ceramics with Al2O3-(m-ZrO2) and t-ZrO2 multilayer shell.
    Swapan Kumar Sarkar, RajatKanti Paul, ByongTaek Lee.
    Solid State Phenomena 2007, 124, p1113-1116.
    Impact Factor: 0.400
  33. Fabrication of CNT-reinforced HAp composites by spark plasma sintering.
    Swapan Kumar Sarkar, Min Ho Youn, Ik Hyun Oh, ByongTaek Lee.
    Materials science forum 2007, 534, p893-896
    Impact Factor: No Impact factor
  34. Core/shell volume effect on the microstructure and mechanical properties of fibrous Al2O3-(m-ZrO2)/t-ZrO2 composite.
    ByongTaek Lee, Swapan Kumar Sarkar, Asit Kumar Gain, Soo-Jae Yim, Ho Yeon Song
    Materials science & engineering. A, 2006,  432(1-2) p 317-323
    Impact Factor: 4.081

  1. In vitro and in vivo assessment of biomedical Mg–Ca alloys for bone implant applications
    P Makkar, SK Sarkar, AR Padalhin, BG Moon, YS Lee, BT Lee
    Journal of applied biomaterials & functional materials, 2018 Jul;16(3):126-136.
    Impact Factor: 1.403
  2. A Study of BMP-2-Loaded Bipotential Electrolytic Complex around a Biphasic Calcium Phosphate-Derived (BCP) Scaffold for Repair of Large Segmental Bone Defect.
    Kallyanashis Paul, Andrew R. Padalhin, Nguyen T. B Linh, Boram Kim, Swapan Kumar Sarkar, ByongTaek Lee
    PLoS ONE 11(10): e0163708. 2016
    Impact Factor: 2.776
  3. Brushite-based calcium phosphate cement with multichannel hydroxyapatite granule loading for improved bone regeneration.
    Swapan Kumar Sarkar, ByungYeol Lee, Andrew ReyasPadalhin, AvikSarker, Nathaniel Carpena, Boram Kim, Kallyanshish Paul, Hwan Jun Choi, Sang-Ho Bae, ByongTaek Lee.
    Journal of BiomaterialsApplication 2016, 30(6) p823-837.
    Impact Factor: 2.442
  4. Synthesis of a novel bioactive glass using the ultrasonic energy assisted hydrothermal method and their biocompatibility evaluation.
    Swapan Kumar Sarkar, Alexander Sadiasa, ByongTaek Lee.
    Journal of Materials Research 2014, 29 (16), p1781-1789.
    Impact Factor: 1.982
  5. Hard tissue regeneration using bone substitutes: an update on innovations in materials.
    Swapan Kumar Sarkar and ByongTaek Lee.
    Korean Journal of Internal Medicine, Vol. 30, No.3, pp 1-15, 2015. (Review paper)
    Impact Factor: 2.131
  6. Effect of rat bone marrow derived–stem cell delivery from serum-loaded oxidized alginate–gelatin– biphasic calcium phosphate hydrogel for bone tissue regeneration using a nude mouse critical-sized calvarial defect model.
    Kallyanashis Paul, Nguyen Thuy Ba Linh, Bo-ram Kim, Swapan Kumar Sarkar, Hwan-Jun Choi, Sang-Ho Bae, Young-Ki Min and Byong-Taek Lee.
    Journal of Bioactive and Compatible Polymers, Vol. 30,No 2,pp. 188-208, 2015.
    Impact Factor: 1.976
  7. Evaluation of the potential anti‐adhesion effect of the PVA/Gelatin membrane.
    Sang‐Ho Bae, So‐Ra Son, Swapan Kumar Sakar, Thi‐Hiep Nguyen, Shin‐Woo Kim, Young‐Ki Min, ByongTaek Lee.
    Journal of Biomedical Materials Research Part B: Applied Biomaterials 2014, 102 (4), p 840-849.
    Impact Factor: 2.674
  8. BMP-2 Immoblized in BCP-Chitosan-Hyaluronic Acid Hybrid Scaffold for Bone Tissue Engineering.
    Subrata Deb Nath, Celine Abueva, Swapan Kumar Sarkar and ByongTaek Lee
    Korean Journal of Materials Research, 2014, 24(12) p704-709.
    Impact Factor: No IF
  9. Platelet-rich plasma encapsulation in hyaluronic acid/gelatin-BCP hydrogel for growth factor delivery in BCP sponge scaffold for bone regeneration.
    So-Ra Son, Swapan Kumar Sarkar, Nguyen Thui Ba Linh, Andrew R Padalhin, Bo-Ram Kim, Hae Il Jung and ByongTaek Lee.
    Journal of biomaterials applications, 2014DOI: 10.1177/0885328214551373.
    Impact Factor: 2.442
  10. The effects of dimethyl 3, 3′-dithiobispropionimidate di-hydrochloride cross-linking of collagen and gelatin coating on porous spherical biphasic calcium phosphate granules.
    Yang Hee Kim, So-Ra Son, Swapan Kumar Sarkar, ByongTaek Lee.
    Journal of biomaterials applications, 2014,  DOI:10.1177/0885328214530483.
    Impact Factor: 2.442
  11. Fabrication of Porous Hydroxyapatite Scaffolds as Artificial Bone Preform and its Biocompatibility Evaluation.
    Dong-Woo Jang, Rose Ann Franco, Swapan Kumar Sarkar, Byong-Taek Lee.
    ASAIO Journal 2014, 60 (2), p 216.
    Impact Factor: 2.494
  12. Bioactive glass incorporation in calcium phosphate cement-based injectable bone substitute for improved in vitro biocompatibility and in vivo bone regeneration.
    Alexander Sadiasa, Swapan Kumar Sarkar, Rose Ann Franco, Young Ki Min, ByongTaek Lee.
    Journal of biomaterials applications 2014, 28 (5), p739-756.
    Impact Factor: 2.442
  13. Fabrication of multilayer ZrO2–biphasic calcium phosphate–poly-caprolactone unidirectional channeled scaffold for bone tissue formation.
    Dibkar Mondal, So-Ra Son, Swapan Kumar Sarkar, Young Ki Min, Hun Mo Yang, ByongTaek Lee.
    Journal of biomaterials applications 2013, 28 (3), p462-472.
    Impact Factor: 2.442
  14. Residual Stress on Concentric Laminated Fibrous Al2O3-ZrO2 Composites on Prolonged High Temperature Exposure.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Korean Journal of Materials Research 2013, 23 (9), p531-536.
    Impact Factor: No IF
  15. Evaluation of formation process of spherical porous biphasic calcium phosphate (BCP) granules by slurry dripping method.
    Swapan Kumar Sarkar, Do-Van Tuyen, Byong-Taek Lee.
    Metals and Materials International 2012, 18 (4), p717-721.
    Impact Factor: 1.647
  16. Microwave sintering and in vitro study of defect-free stable porous multilayered HAp–ZrO2 artificial bone scaffold.
    Dong-Woo Jang, Thi-Hiep Nguyen, Swapan Kumar Sarkar, Byong-Taek Lee.
    Science and Technology of Advanced Materials 2012, 13 (3), 035009.
    Impact Factor: 3.585
  17. Fabrication of novel multilayer Al2O3–(m-ZrO2)/t-ZrO2fibrous ceramics composites.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics International 2012, 38 (2), p1043-1050.
    Impact Factor: 3.057
  18. Formation of TiO2nano fibers on a micro-channeled Al2O3–ZrO2/TiO2 porous composite membrane for photocatalytic filtration.
    Hyun-Jin Hong, Swapan Kumar Sarkar, Byong-Taek Lee.
    Journal of the European Ceramic Society 2012 32 (3), p657-663.
    Impact Factor: 3.794
  19. Comparative Study of Microstructures and Material Properties in the Vacuum and Spark Plasma Sintered Ti-Calcium Phosphate Composites.
    Dibakar Mondal, Swapan Kumar Sarkar, Ik-Hyun Oh, Byong-Taek Lee.
    Materials transactions 2011, 52 (7), p1436-1442.
    Impact Factor: 0.675
  20. Fabrication and characterization of the Ti-Ca-P composites by vacuum sintering.
    Dibakar Mondal, Swapan Kumar Sarkar, Dong-Won Lee, Young-Seon Lee, Byong-Taek Lee.
    Journal of Biomedical Science 2011, 4 p583-590.
    Impact Factor: 5.203
  21. Synthesis of Bioactive Glass by Microwave Energy Irradiation and Its In-Vitro Biocompatibility
    Swapan Kumar Sarkar, ByongTaek Lee
    Bioceramics Development and Applications 2011, 1, p1-3
    Impact Factor: No IF
  22. Co-Axially Laminated Continuously Porous Composites in Al2O3-(m-ZrO2)/t-ZrO2 System for High Mechanical Strength.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Materials transactions 2010, 51 (12), p2168-2172.
    Impact Factor: 0.674
  23. Initial biocompatibility and enhanced osteoblast response of Si doping in a porous BCP bone graft substitute.
    In-SeonByun, Swapan Kumar Sarkar, M AnirbanJyoti, Young-Ki Min, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Journal of Materials Science: Materials in Medicine 2010, 21 (6), p1937-1947.
    Impact Factor: 2.467
  24. Effect of Strontium Doped Porous BCP as Bone Graft Substitutes on Osteoblast.
    In-SeonByun, Swapan Kumar Sarkar, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Korean J. Mater. Res 2010, 20 (3), p155-160.
    Impact Factor: No IF
  25. Evaluation and comparison of the microstructure and mechanical properties of fibrous Al2O3―(m-ZrO2)/t-ZrO2 composites after multiple extrusion steps.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics international 2010, 36 (6), p1971-1976
    Impact Factor: 3.057
  26. Fabrication of super-high-strength microchanneled Al2O3–ZrO2 ceramic composites with fibrous microstructure.
    ByongTaek Lee,Swapan Kumar Sarkar.
    ScriptaMaterialia2009, 61 (7), p686-689

    Impact Factor: 4.539
  27. Fabrication of bioglass infiltrated Al2O3–(m-ZrO2) composites.
    Ho-Yeon Song, Swapan Kumar Sarkar, Min Sung Kim, Young Ki Min, Yang Hun Mo, Byong-Taek Lee.
    Journal of Materials Science: Materials in Medicine 2009, 20 (1), p265-269
    Impact Factor: 2.467
  28. Fabrication of fibrous Al2O3-(m-ZrO2)/HAp-(t-ZrO2) core/shell composites with elongated grain formation.
    Byong-Taek Lee, Chi-Woo Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the Ceramic Society of Japan 2009, 117 (1362), p152-156
    Impact Factor: 0.828
  29. Microstructure and material properties of double-network type fibrous (Al2O3–m-ZrO2)/t-ZrO2 composites.
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the European Ceramic Society 2008, 28 (1), p229-233
    Impact Factor: 3.794
  30. Novel bamboo-like fibrous, micro-channeled and functional gradient microstructure control of ceramics
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Materials transactions 2008, 49 (2), p339-344
    Impact Factor: 0.674
  31. Fabrication and Characterization of Porous TCP coated Al2O3 Scaffold by Polymeric Sponge Method.
    Swapan Kumar Sarkar, Young Hee Kim, Min Sung Kim, Young Ki Min, Hun Mo Yang, Ho-Yeon Song, Byong-Taek Lee.
    Journal of the Korean Ceramic Society 2007, 45 (10), p579-583.
    Impact Factor: No Impact factor
  32. Fabrication and microstructure control of continuously porous ceramics with Al2O3-(m-ZrO2) and t-ZrO2 multilayer shell.
    Swapan Kumar Sarkar, RajatKanti Paul, ByongTaek Lee.
    Solid State Phenomena 2007, 124, p1113-1116.
    Impact Factor: 0.400
  33. Fabrication of CNT-reinforced HAp composites by spark plasma sintering.
    Swapan Kumar Sarkar, Min Ho Youn, Ik Hyun Oh, ByongTaek Lee.
    Materials science forum 2007, 534, p893-896
    Impact Factor: No Impact factor
  34. Core/shell volume effect on the microstructure and mechanical properties of fibrous Al2O3-(m-ZrO2)/t-ZrO2 composite.
    ByongTaek Lee, Swapan Kumar Sarkar, Asit Kumar Gain, Soo-Jae Yim, Ho Yeon Song
    Materials science & engineering. A, 2006,  432(1-2) p 317-323
    Impact Factor: 4.081

  1. In vitro and in vivo assessment of biomedical Mg–Ca alloys for bone implant applications
    P Makkar, SK Sarkar, AR Padalhin, BG Moon, YS Lee, BT Lee
    Journal of applied biomaterials & functional materials, 2018 Jul;16(3):126-136.
    Impact Factor: 1.403
  2. A Study of BMP-2-Loaded Bipotential Electrolytic Complex around a Biphasic Calcium Phosphate-Derived (BCP) Scaffold for Repair of Large Segmental Bone Defect.
    Kallyanashis Paul, Andrew R. Padalhin, Nguyen T. B Linh, Boram Kim, Swapan Kumar Sarkar, ByongTaek Lee
    PLoS ONE 11(10): e0163708. 2016
    Impact Factor: 2.776
  3. Brushite-based calcium phosphate cement with multichannel hydroxyapatite granule loading for improved bone regeneration.
    Swapan Kumar Sarkar, ByungYeol Lee, Andrew ReyasPadalhin, AvikSarker, Nathaniel Carpena, Boram Kim, Kallyanshish Paul, Hwan Jun Choi, Sang-Ho Bae, ByongTaek Lee.
    Journal of BiomaterialsApplication 2016, 30(6) p823-837.
    Impact Factor: 2.442
  4. Synthesis of a novel bioactive glass using the ultrasonic energy assisted hydrothermal method and their biocompatibility evaluation.
    Swapan Kumar Sarkar, Alexander Sadiasa, ByongTaek Lee.
    Journal of Materials Research 2014, 29 (16), p1781-1789.
    Impact Factor: 1.982
  5. Hard tissue regeneration using bone substitutes: an update on innovations in materials.
    Swapan Kumar Sarkar and ByongTaek Lee.
    Korean Journal of Internal Medicine, Vol. 30, No.3, pp 1-15, 2015. (Review paper)
    Impact Factor: 2.131
  6. Effect of rat bone marrow derived–stem cell delivery from serum-loaded oxidized alginate–gelatin– biphasic calcium phosphate hydrogel for bone tissue regeneration using a nude mouse critical-sized calvarial defect model.
    Kallyanashis Paul, Nguyen Thuy Ba Linh, Bo-ram Kim, Swapan Kumar Sarkar, Hwan-Jun Choi, Sang-Ho Bae, Young-Ki Min and Byong-Taek Lee.
    Journal of Bioactive and Compatible Polymers, Vol. 30,No 2,pp. 188-208, 2015.
    Impact Factor: 1.976
  7. Evaluation of the potential anti‐adhesion effect of the PVA/Gelatin membrane.
    Sang‐Ho Bae, So‐Ra Son, Swapan Kumar Sakar, Thi‐Hiep Nguyen, Shin‐Woo Kim, Young‐Ki Min, ByongTaek Lee.
    Journal of Biomedical Materials Research Part B: Applied Biomaterials 2014, 102 (4), p 840-849.
    Impact Factor: 2.674
  8. BMP-2 Immoblized in BCP-Chitosan-Hyaluronic Acid Hybrid Scaffold for Bone Tissue Engineering.
    Subrata Deb Nath, Celine Abueva, Swapan Kumar Sarkar and ByongTaek Lee
    Korean Journal of Materials Research, 2014, 24(12) p704-709.
    Impact Factor: No IF
  9. Platelet-rich plasma encapsulation in hyaluronic acid/gelatin-BCP hydrogel for growth factor delivery in BCP sponge scaffold for bone regeneration.
    So-Ra Son, Swapan Kumar Sarkar, Nguyen Thui Ba Linh, Andrew R Padalhin, Bo-Ram Kim, Hae Il Jung and ByongTaek Lee.
    Journal of biomaterials applications, 2014DOI: 10.1177/0885328214551373.
    Impact Factor: 2.442
  10. The effects of dimethyl 3, 3′-dithiobispropionimidate di-hydrochloride cross-linking of collagen and gelatin coating on porous spherical biphasic calcium phosphate granules.
    Yang Hee Kim, So-Ra Son, Swapan Kumar Sarkar, ByongTaek Lee.
    Journal of biomaterials applications, 2014,  DOI:10.1177/0885328214530483.
    Impact Factor: 2.442
  11. Fabrication of Porous Hydroxyapatite Scaffolds as Artificial Bone Preform and its Biocompatibility Evaluation.
    Dong-Woo Jang, Rose Ann Franco, Swapan Kumar Sarkar, Byong-Taek Lee.
    ASAIO Journal 2014, 60 (2), p 216.
    Impact Factor: 2.494
  12. Bioactive glass incorporation in calcium phosphate cement-based injectable bone substitute for improved in vitro biocompatibility and in vivo bone regeneration.
    Alexander Sadiasa, Swapan Kumar Sarkar, Rose Ann Franco, Young Ki Min, ByongTaek Lee.
    Journal of biomaterials applications 2014, 28 (5), p739-756.
    Impact Factor: 2.442
  13. Fabrication of multilayer ZrO2–biphasic calcium phosphate–poly-caprolactone unidirectional channeled scaffold for bone tissue formation.
    Dibkar Mondal, So-Ra Son, Swapan Kumar Sarkar, Young Ki Min, Hun Mo Yang, ByongTaek Lee.
    Journal of biomaterials applications 2013, 28 (3), p462-472.
    Impact Factor: 2.442
  14. Residual Stress on Concentric Laminated Fibrous Al2O3-ZrO2 Composites on Prolonged High Temperature Exposure.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Korean Journal of Materials Research 2013, 23 (9), p531-536.
    Impact Factor: No IF
  15. Evaluation of formation process of spherical porous biphasic calcium phosphate (BCP) granules by slurry dripping method.
    Swapan Kumar Sarkar, Do-Van Tuyen, Byong-Taek Lee.
    Metals and Materials International 2012, 18 (4), p717-721.
    Impact Factor: 1.647
  16. Microwave sintering and in vitro study of defect-free stable porous multilayered HAp–ZrO2 artificial bone scaffold.
    Dong-Woo Jang, Thi-Hiep Nguyen, Swapan Kumar Sarkar, Byong-Taek Lee.
    Science and Technology of Advanced Materials 2012, 13 (3), 035009.
    Impact Factor: 3.585
  17. Fabrication of novel multilayer Al2O3–(m-ZrO2)/t-ZrO2fibrous ceramics composites.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics International 2012, 38 (2), p1043-1050.
    Impact Factor: 3.057
  18. Formation of TiO2nano fibers on a micro-channeled Al2O3–ZrO2/TiO2 porous composite membrane for photocatalytic filtration.
    Hyun-Jin Hong, Swapan Kumar Sarkar, Byong-Taek Lee.
    Journal of the European Ceramic Society 2012 32 (3), p657-663.
    Impact Factor: 3.794
  19. Comparative Study of Microstructures and Material Properties in the Vacuum and Spark Plasma Sintered Ti-Calcium Phosphate Composites.
    Dibakar Mondal, Swapan Kumar Sarkar, Ik-Hyun Oh, Byong-Taek Lee.
    Materials transactions 2011, 52 (7), p1436-1442.
    Impact Factor: 0.675
  20. Fabrication and characterization of the Ti-Ca-P composites by vacuum sintering.
    Dibakar Mondal, Swapan Kumar Sarkar, Dong-Won Lee, Young-Seon Lee, Byong-Taek Lee.
    Journal of Biomedical Science 2011, 4 p583-590.
    Impact Factor: 5.203
  21. Synthesis of Bioactive Glass by Microwave Energy Irradiation and Its In-Vitro Biocompatibility
    Swapan Kumar Sarkar, ByongTaek Lee
    Bioceramics Development and Applications 2011, 1, p1-3
    Impact Factor: No IF
  22. Co-Axially Laminated Continuously Porous Composites in Al2O3-(m-ZrO2)/t-ZrO2 System for High Mechanical Strength.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Materials transactions 2010, 51 (12), p2168-2172.
    Impact Factor: 0.674
  23. Initial biocompatibility and enhanced osteoblast response of Si doping in a porous BCP bone graft substitute.
    In-SeonByun, Swapan Kumar Sarkar, M AnirbanJyoti, Young-Ki Min, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Journal of Materials Science: Materials in Medicine 2010, 21 (6), p1937-1947.
    Impact Factor: 2.467
  24. Effect of Strontium Doped Porous BCP as Bone Graft Substitutes on Osteoblast.
    In-SeonByun, Swapan Kumar Sarkar, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Korean J. Mater. Res 2010, 20 (3), p155-160.
    Impact Factor: No IF
  25. Evaluation and comparison of the microstructure and mechanical properties of fibrous Al2O3―(m-ZrO2)/t-ZrO2 composites after multiple extrusion steps.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics international 2010, 36 (6), p1971-1976
    Impact Factor: 3.057
  26. Fabrication of super-high-strength microchanneled Al2O3–ZrO2 ceramic composites with fibrous microstructure.
    ByongTaek Lee,Swapan Kumar Sarkar.
    ScriptaMaterialia2009, 61 (7), p686-689

    Impact Factor: 4.539
  27. Fabrication of bioglass infiltrated Al2O3–(m-ZrO2) composites.
    Ho-Yeon Song, Swapan Kumar Sarkar, Min Sung Kim, Young Ki Min, Yang Hun Mo, Byong-Taek Lee.
    Journal of Materials Science: Materials in Medicine 2009, 20 (1), p265-269
    Impact Factor: 2.467
  28. Fabrication of fibrous Al2O3-(m-ZrO2)/HAp-(t-ZrO2) core/shell composites with elongated grain formation.
    Byong-Taek Lee, Chi-Woo Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the Ceramic Society of Japan 2009, 117 (1362), p152-156
    Impact Factor: 0.828
  29. Microstructure and material properties of double-network type fibrous (Al2O3–m-ZrO2)/t-ZrO2 composites.
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the European Ceramic Society 2008, 28 (1), p229-233
    Impact Factor: 3.794
  30. Novel bamboo-like fibrous, micro-channeled and functional gradient microstructure control of ceramics
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Materials transactions 2008, 49 (2), p339-344
    Impact Factor: 0.674
  31. Fabrication and Characterization of Porous TCP coated Al2O3 Scaffold by Polymeric Sponge Method.
    Swapan Kumar Sarkar, Young Hee Kim, Min Sung Kim, Young Ki Min, Hun Mo Yang, Ho-Yeon Song, Byong-Taek Lee.
    Journal of the Korean Ceramic Society 2007, 45 (10), p579-583.
    Impact Factor: No Impact factor
  32. Fabrication and microstructure control of continuously porous ceramics with Al2O3-(m-ZrO2) and t-ZrO2 multilayer shell.
    Swapan Kumar Sarkar, RajatKanti Paul, ByongTaek Lee.
    Solid State Phenomena 2007, 124, p1113-1116.
    Impact Factor: 0.400
  33. Fabrication of CNT-reinforced HAp composites by spark plasma sintering.
    Swapan Kumar Sarkar, Min Ho Youn, Ik Hyun Oh, ByongTaek Lee.
    Materials science forum 2007, 534, p893-896
    Impact Factor: No Impact factor
  34. Core/shell volume effect on the microstructure and mechanical properties of fibrous Al2O3-(m-ZrO2)/t-ZrO2 composite.
    ByongTaek Lee, Swapan Kumar Sarkar, Asit Kumar Gain, Soo-Jae Yim, Ho Yeon Song
    Materials science & engineering. A, 2006,  432(1-2) p 317-323
    Impact Factor: 4.081

  1. In vitro and in vivo assessment of biomedical Mg–Ca alloys for bone implant applications
    P Makkar, SK Sarkar, AR Padalhin, BG Moon, YS Lee, BT Lee
    Journal of applied biomaterials & functional materials, 2018 Jul;16(3):126-136.
    Impact Factor: 1.403
  2. A Study of BMP-2-Loaded Bipotential Electrolytic Complex around a Biphasic Calcium Phosphate-Derived (BCP) Scaffold for Repair of Large Segmental Bone Defect.
    Kallyanashis Paul, Andrew R. Padalhin, Nguyen T. B Linh, Boram Kim, Swapan Kumar Sarkar, ByongTaek Lee
    PLoS ONE 11(10): e0163708. 2016
    Impact Factor: 2.776
  3. Brushite-based calcium phosphate cement with multichannel hydroxyapatite granule loading for improved bone regeneration.
    Swapan Kumar Sarkar, ByungYeol Lee, Andrew ReyasPadalhin, AvikSarker, Nathaniel Carpena, Boram Kim, Kallyanshish Paul, Hwan Jun Choi, Sang-Ho Bae, ByongTaek Lee.
    Journal of BiomaterialsApplication 2016, 30(6) p823-837.
    Impact Factor: 2.442
  4. Synthesis of a novel bioactive glass using the ultrasonic energy assisted hydrothermal method and their biocompatibility evaluation.
    Swapan Kumar Sarkar, Alexander Sadiasa, ByongTaek Lee.
    Journal of Materials Research 2014, 29 (16), p1781-1789.
    Impact Factor: 1.982
  5. Hard tissue regeneration using bone substitutes: an update on innovations in materials.
    Swapan Kumar Sarkar and ByongTaek Lee.
    Korean Journal of Internal Medicine, Vol. 30, No.3, pp 1-15, 2015. (Review paper)
    Impact Factor: 2.131
  6. Effect of rat bone marrow derived–stem cell delivery from serum-loaded oxidized alginate–gelatin– biphasic calcium phosphate hydrogel for bone tissue regeneration using a nude mouse critical-sized calvarial defect model.
    Kallyanashis Paul, Nguyen Thuy Ba Linh, Bo-ram Kim, Swapan Kumar Sarkar, Hwan-Jun Choi, Sang-Ho Bae, Young-Ki Min and Byong-Taek Lee.
    Journal of Bioactive and Compatible Polymers, Vol. 30,No 2,pp. 188-208, 2015.
    Impact Factor: 1.976
  7. Evaluation of the potential anti‐adhesion effect of the PVA/Gelatin membrane.
    Sang‐Ho Bae, So‐Ra Son, Swapan Kumar Sakar, Thi‐Hiep Nguyen, Shin‐Woo Kim, Young‐Ki Min, ByongTaek Lee.
    Journal of Biomedical Materials Research Part B: Applied Biomaterials 2014, 102 (4), p 840-849.
    Impact Factor: 2.674
  8. BMP-2 Immoblized in BCP-Chitosan-Hyaluronic Acid Hybrid Scaffold for Bone Tissue Engineering.
    Subrata Deb Nath, Celine Abueva, Swapan Kumar Sarkar and ByongTaek Lee
    Korean Journal of Materials Research, 2014, 24(12) p704-709.
    Impact Factor: No IF
  9. Platelet-rich plasma encapsulation in hyaluronic acid/gelatin-BCP hydrogel for growth factor delivery in BCP sponge scaffold for bone regeneration.
    So-Ra Son, Swapan Kumar Sarkar, Nguyen Thui Ba Linh, Andrew R Padalhin, Bo-Ram Kim, Hae Il Jung and ByongTaek Lee.
    Journal of biomaterials applications, 2014DOI: 10.1177/0885328214551373.
    Impact Factor: 2.442
  10. The effects of dimethyl 3, 3′-dithiobispropionimidate di-hydrochloride cross-linking of collagen and gelatin coating on porous spherical biphasic calcium phosphate granules.
    Yang Hee Kim, So-Ra Son, Swapan Kumar Sarkar, ByongTaek Lee.
    Journal of biomaterials applications, 2014,  DOI:10.1177/0885328214530483.
    Impact Factor: 2.442
  11. Fabrication of Porous Hydroxyapatite Scaffolds as Artificial Bone Preform and its Biocompatibility Evaluation.
    Dong-Woo Jang, Rose Ann Franco, Swapan Kumar Sarkar, Byong-Taek Lee.
    ASAIO Journal 2014, 60 (2), p 216.
    Impact Factor: 2.494
  12. Bioactive glass incorporation in calcium phosphate cement-based injectable bone substitute for improved in vitro biocompatibility and in vivo bone regeneration.
    Alexander Sadiasa, Swapan Kumar Sarkar, Rose Ann Franco, Young Ki Min, ByongTaek Lee.
    Journal of biomaterials applications 2014, 28 (5), p739-756.
    Impact Factor: 2.442
  13. Fabrication of multilayer ZrO2–biphasic calcium phosphate–poly-caprolactone unidirectional channeled scaffold for bone tissue formation.
    Dibkar Mondal, So-Ra Son, Swapan Kumar Sarkar, Young Ki Min, Hun Mo Yang, ByongTaek Lee.
    Journal of biomaterials applications 2013, 28 (3), p462-472.
    Impact Factor: 2.442
  14. Residual Stress on Concentric Laminated Fibrous Al2O3-ZrO2 Composites on Prolonged High Temperature Exposure.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Korean Journal of Materials Research 2013, 23 (9), p531-536.
    Impact Factor: No IF
  15. Evaluation of formation process of spherical porous biphasic calcium phosphate (BCP) granules by slurry dripping method.
    Swapan Kumar Sarkar, Do-Van Tuyen, Byong-Taek Lee.
    Metals and Materials International 2012, 18 (4), p717-721.
    Impact Factor: 1.647
  16. Microwave sintering and in vitro study of defect-free stable porous multilayered HAp–ZrO2 artificial bone scaffold.
    Dong-Woo Jang, Thi-Hiep Nguyen, Swapan Kumar Sarkar, Byong-Taek Lee.
    Science and Technology of Advanced Materials 2012, 13 (3), 035009.
    Impact Factor: 3.585
  17. Fabrication of novel multilayer Al2O3–(m-ZrO2)/t-ZrO2fibrous ceramics composites.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics International 2012, 38 (2), p1043-1050.
    Impact Factor: 3.057
  18. Formation of TiO2nano fibers on a micro-channeled Al2O3–ZrO2/TiO2 porous composite membrane for photocatalytic filtration.
    Hyun-Jin Hong, Swapan Kumar Sarkar, Byong-Taek Lee.
    Journal of the European Ceramic Society 2012 32 (3), p657-663.
    Impact Factor: 3.794
  19. Comparative Study of Microstructures and Material Properties in the Vacuum and Spark Plasma Sintered Ti-Calcium Phosphate Composites.
    Dibakar Mondal, Swapan Kumar Sarkar, Ik-Hyun Oh, Byong-Taek Lee.
    Materials transactions 2011, 52 (7), p1436-1442.
    Impact Factor: 0.675
  20. Fabrication and characterization of the Ti-Ca-P composites by vacuum sintering.
    Dibakar Mondal, Swapan Kumar Sarkar, Dong-Won Lee, Young-Seon Lee, Byong-Taek Lee.
    Journal of Biomedical Science 2011, 4 p583-590.
    Impact Factor: 5.203
  21. Synthesis of Bioactive Glass by Microwave Energy Irradiation and Its In-Vitro Biocompatibility
    Swapan Kumar Sarkar, ByongTaek Lee
    Bioceramics Development and Applications 2011, 1, p1-3
    Impact Factor: No IF
  22. Co-Axially Laminated Continuously Porous Composites in Al2O3-(m-ZrO2)/t-ZrO2 System for High Mechanical Strength.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Materials transactions 2010, 51 (12), p2168-2172.
    Impact Factor: 0.674
  23. Initial biocompatibility and enhanced osteoblast response of Si doping in a porous BCP bone graft substitute.
    In-SeonByun, Swapan Kumar Sarkar, M AnirbanJyoti, Young-Ki Min, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Journal of Materials Science: Materials in Medicine 2010, 21 (6), p1937-1947.
    Impact Factor: 2.467
  24. Effect of Strontium Doped Porous BCP as Bone Graft Substitutes on Osteoblast.
    In-SeonByun, Swapan Kumar Sarkar, Hyung-SeokSeo, Byong-Taek Lee, Ho-Yeon Song.
    Korean J. Mater. Res 2010, 20 (3), p155-160.
    Impact Factor: No IF
  25. Evaluation and comparison of the microstructure and mechanical properties of fibrous Al2O3―(m-ZrO2)/t-ZrO2 composites after multiple extrusion steps.
    Swapan Kumar Sarkar, ByongTaek Lee.
    Ceramics international 2010, 36 (6), p1971-1976
    Impact Factor: 3.057
  26. Fabrication of super-high-strength microchanneled Al2O3–ZrO2 ceramic composites with fibrous microstructure.
    ByongTaek Lee,Swapan Kumar Sarkar.
    ScriptaMaterialia2009, 61 (7), p686-689

    Impact Factor: 4.539
  27. Fabrication of bioglass infiltrated Al2O3–(m-ZrO2) composites.
    Ho-Yeon Song, Swapan Kumar Sarkar, Min Sung Kim, Young Ki Min, Yang Hun Mo, Byong-Taek Lee.
    Journal of Materials Science: Materials in Medicine 2009, 20 (1), p265-269
    Impact Factor: 2.467
  28. Fabrication of fibrous Al2O3-(m-ZrO2)/HAp-(t-ZrO2) core/shell composites with elongated grain formation.
    Byong-Taek Lee, Chi-Woo Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the Ceramic Society of Japan 2009, 117 (1362), p152-156
    Impact Factor: 0.828
  29. Microstructure and material properties of double-network type fibrous (Al2O3–m-ZrO2)/t-ZrO2 composites.
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Journal of the European Ceramic Society 2008, 28 (1), p229-233
    Impact Factor: 3.794
  30. Novel bamboo-like fibrous, micro-channeled and functional gradient microstructure control of ceramics
    Byong-Taek Lee, Swapan Kumar Sarkar, Ho-Yeon Song
    Materials transactions 2008, 49 (2), p339-344
    Impact Factor: 0.674
  31. Fabrication and Characterization of Porous TCP coated Al2O3 Scaffold by Polymeric Sponge Method.
    Swapan Kumar Sarkar, Young Hee Kim, Min Sung Kim, Young Ki Min, Hun Mo Yang, Ho-Yeon Song, Byong-Taek Lee.
    Journal of the Korean Ceramic Society 2007, 45 (10), p579-583.
    Impact Factor: No Impact factor
  32. Fabrication and microstructure control of continuously porous ceramics with Al2O3-(m-ZrO2) and t-ZrO2 multilayer shell.
    Swapan Kumar Sarkar, RajatKanti Paul, ByongTaek Lee.
    Solid State Phenomena 2007, 124, p1113-1116.
    Impact Factor: 0.400
  33. Fabrication of CNT-reinforced HAp composites by spark plasma sintering.
    Swapan Kumar Sarkar, Min Ho Youn, Ik Hyun Oh, ByongTaek Lee.
    Materials science forum 2007, 534, p893-896
    Impact Factor: No Impact factor
  34. Core/shell volume effect on the microstructure and mechanical properties of fibrous Al2O3-(m-ZrO2)/t-ZrO2 composite.
    ByongTaek Lee, Swapan Kumar Sarkar, Asit Kumar Gain, Soo-Jae Yim, Ho Yeon Song
    Materials science & engineering. A, 2006,  432(1-2) p 317-323
    Impact Factor: 4.081

Nupur Karmaker

1. Nupur Karmaker1,HasinAnupama Azhari1, Abdul Al Mortuza2, Abhijit Chanda3,Golam Abu Zakaria4 “Kinematic Analysis Of Human Gait For Typical Postures Of Walking, Running And Cart Pulling” Medical Physics International Journal, Vol.4, No.2, page-528, 2016.

2.“Capacity Building of Medical Physics in Bangladesh” H. A. Azhari 1, N. Karmaker1,G. A. Zakaria1, 2. Medical Physics International Journal, Ongoing.

3.“Design and Development of Sensor Based Patient Position Monitor Device” N Karmaker, A Rahman, A Kausar (Submitted).

Md. Nazmul Alim

Md. Mokhlesur Rahman

Md. Mokhlesur Rahman, Md. Hafizur Rahman, Azhari Hasin Anupama, Zakaria Golam Abu …et al.  A Hybrid IMRT Technique for Treatment of Breast Cancer: A dosimetric Study;  International Journal of Scientific and Engineering Research (IJSER), accepted on 25 June 2020, ISSN 2229-5518

Md. Mafazur Rahman, Md. Mokhlesur Rahman, Azhari Hasin Anupama, Zakaria Golam Abu …et.  al Analysis of NTCP Based Radiobiological Models: A Systematic Review of Literature: International Journal of Cancer Research and Therapy: Published: 23rd Oct. 2019

Md. Rustam Ali, Md. Mokhlesur Rahman, Hasin Anupama Azhari ….et al, Acceptance Testing of a Varian Linear Accelerator for Electron and Photon Beams: Bangladesh Journal of Physics ,25,41-54. June 2019.

Md. Atiquzzaman, Md. Rustam Ali, Md. Mokhlesur Rahman, Hasin Anupama Azhari ….et al, Acceptance Testing of HDR Co-60 Brachytherapy Unit. Bangladesh Journal of Physics ,25,21-30. June 2019.

Rahman Mohammad Mokhlesur, Zakaria Golam Abu, Azhari Hasin Anupama….et al Deep Inspiration Breath Hold Techniques with Homemade LPT System For Left Breast Cancer Using 3DCRT: Medical Physics International Journal, Vol.4, No.2, 2016, Page No. 217 (Oral Presentations), ICMP 2016.

Kajol Bala 

  • Kajol Bala,Md.Rakib-Ur-Rahman, Chayan Mondal “A Prototype Cost-effective Human-Machine Interaction Arm (CHMI-Arm) with Signal Processing Via MATLAB” IJMTE, Volume X, Issue III, MARCH – 2020, Page- 166-177. https://app.box.com/s/vcadc715821dbqd323fpnnmms42zic63


Shamima  Sultana

  •  Sultana1, J. Ferdous, M. M. Haque.“Natural Radioactivity and Hazards Assessment in Medicinal Plants in Bangladesh” “entitled Journal of Health Science 2020,10(1): 20-27, DOI: 10.5923/j.health.20201001.03” 


Sujan  Mahamud

  • Sujan Mahamud, Azhari Hasin Anupama,Zakaria Golam Abu, et al “Verification of treatment time in interstitial brachytherapy using Paris system”: A Dosimetric Study: Japanese Journal of Medical Physics, Vol 39 Supplement No. 1 (April 2019).
  • Rahman M, Mondol M, Sujan M ,Zakaria Golam Abu and Azhari Hasin Anupama all “Analysis of NTCP Based Radiobiological Models: A Systematic  Review of Literature”, International Journal of Cancer Research and Therapy,ISSN:2476-2377 Submitted: 2Oct 2019;Accepted :12 Oct 2019;Published: 23 Oct 2019.